Black Box Compact Media Converter TP/BNC 50-ohm, LMCD09A-FI5 manual Installation, LMC009A-R5, Page

Chapter 3 Installation

3. Install the Compact Media Converter TP/BNC 50-ohm

The Compact Media Converter TP/BNC converters come ready to install. Deploy Compact Media Converter TP/BNC units in pairs, or connect a Compact Media Converter TP/BNC converter to another Black Box converter. To install a Compact Media Converter TP/BNC converter, first make sure that the unit is placed on a flat surface. Attach the cables between the Compact Media Converter TP/BNC and each device that will be interconnect, the plug the unit into a reliable, filtered power source. Make sure to connect the BNC port of the Compact Media Converter TP/BNC converter only to 50-ohm coaxial cable.

When connecting an Ethernet cable to the Compact Media Converter TP/BNC, make sure the cable corresponds to the Crossover/Pass-Through switch. When using the Crossover cable, make sure the switch is out, in the “X” setting. The switch can be pressed again to change the setting.

LMC009A-R5 724-746-5500 blackbox.com Page 7