CHAPTER 3: Installation
5.The Locate Driver Files screen appears and asks where you want Windows to search for driver files.
Verify that the “Specify a location” option is the only one selected, place the Modem Installation CD into your CD drive, and click Next >.
6.The next screen will say “Insert the manufacturer’s installation disk into the drive selected and then click OK.”
Click on the Browse button. When prompted to insert a disk into drive A:\, click Cancel. Navigate to your computer’s CD drive.
Select the folder DRIVERS\WIN 2000. Select the file mdmbbusb.inf and click Open.
7.The Driver Files Search Results screen appears, indicating that Windows has found the proper driver from the Modem Installation CD. Click Next > to install the selected driver.
8.The Digital Signature Not Found dialog box is displayed. Click Yes to continue with the installation.
NOTE
This Microsoft® operating system searches for a digital signature when you install any new hardware. If a “Digital Signature Not Found” screen appears, simply click the “Yes” button to continue installation. Not having a digital signature does not affect product performance in any way.
9.A Copying Files screen appears briefly. After the files have been copied to your PC, a Found New Hardware Wizard screen appears and tells you that Windows has finished installing the driver. Click Finish to complete the installation and exit the wizard.
3.2.2INSTALLATION IN WINDOWS ME
The Portable USB Modem driver files for Windows Me are installed in two groups, as described below. The installation wizard begins by installing certain driver files. At that point, Windows Me detects the modem as a new device. Then the installation wizard runs again to install the remaining driver files.
1.Power up your Windows Me computer.
2.Connect the Portable USB Modem to your computer’s USB port. Then connect one end of the provided telephone line cord to your Portable USB Modem and the other end to a telephone wall jack.
15
