Local
When both Local and Remote
Transmit/force 1’s to fiber
This switch is used to insert an “all ones” pattern into the data stream being transmitted out of the fiber port on the FlexPoint T1/E1 converter. Data being received on the coax
or twisted pair will be disabled and data being received on the fiber is passed through to the coax or twisted pair side. By returning the switch to the normal position the unit will resume to normal operation.
Transmit/force 1’s to Coax or UTP
This switch is used to insert an “all ones” pattern into the data stream being transmitted out of the coax or twisted pair on the FlexPoint T1/E1 converter. Data being received on the fiber will be disabled and data being received on the coax or twisted pair is passed through to the fiber side. By returning the switch to the normal position the unit will resume to normal operation.
Alarm Relay Contacts
The FlexPoint T1/E1 converter also features dry relay contacts for optionally connecting the media converter into a separate T1/E1 alarm circuit. The relay closes when a loss of power or when signal detect is lost to the copper or fiber connection.
Relay | |
| 3 |
6
Page 7
FlexPoint™ T1/E1 Copper to Fiber
Line Driver
CUSTOMER | Order |
SUPPORT | (outside U.S. call |
INFORMATION | FREE technical support 24 hours a day, 7 days a |
| week; Call |
| Mailing address: Black Box Corporation, |
| 1000 Park Drive, Lawrence, PA |
| Web site: www.blackbox.com |
| |
| Page 1 |
Operational rating on relay pins 3 & 6:
LED Indicators
LED Color | Status | Description |
Power: |
|
|
Yellow | On | Power applied |
Fiber: |
|
|
Green | Off | No signal detect |
| On | Signal detect |
UTP/Coax: | Blink | All ones received |
|
| |
Green | Off | No signal detect |
| On | Signal detect |
Test: | Blink | All ones received |
|
| |
Yellow | Off | Normal operation |
| On | L/LB or All 1’s Test mode |
| Blink | R+L/LB Received master |
| Fast Blink | R+L/LB Received slave |
Fiber Cable Specifications:
Multimode
Cable: | 50/125, 62.5/125, 100/140 μm |
Wavelength: | 1300nm |
Max Distance: | 5km / 3.1mi |
Cable: | 9/125 μm |
Wavelength: | 1300nm |
Max Distance: | 28km / 16.8mi |
| |
Cable: | 9/125 μm |
Page 8
Description:
The FlexPoint T1/E1 connects T1 and E1 devices, such as PBXs, CSUs and routers, via multimode (MM) or
Model # | Fiber Type | Max Distance |
MM, ST, 1300nm | 5km / 3.1mi | |
SM, ST, 1300nm | 28km / 16.8mi | |
MM, SC, 1300nm | 5km / 3.1mi | |
SM, SC, 1300nm | 28km / 16.8mi | |
SM, SC, 1300nm | 58km / 36 mi | |
MM, ST, 1300nm | 5km / 3.1mi | |
SM, ST, 1300nm | 28km / 16.8mi | |
MM, SC, 1300nm | 5km / 3.1mi | |
SM, SC, 1300nm | 28km / 16.8mi | |
SM, SC, 1300nm | 58km / 36 mi |
Power Adapter Notice
1.When Using in a
2.This product should always be used only with the supplied power unit .
3.Models shipped with international power supplies are capable of auto switching from
4.For products being shipped outside of the U.S., the user is required to install a properly grounded IEC
Page 2
Wavelength: | 1300nm |
Max Distance: | 58km / 36mi |
Copper Cable Specifications:
Gauge | 22 to 24 AWG |
Impedance | 100 Ω + 10% |
Impedance characteristic | 2.6 dB / 100m @ 1.0 MHz |
Maximum distance | 6,000 ft |
| |
Gauge | 22 to 24 AWG |
Impedance | 120 Ω + 10% |
Impedance characteristic | 2.6 dB / 100m @ 1.0 MHz |
Maximum distance | 8,000 ft |
Coax cable for E1 |
|
Gauge | 22 to 24 AWG |
Impedance | 75 Ω + 10% |
Impedance characteristic | 2 dB / 100m @ 1.0 MHz |
Maximum distance | 8,000 ft |
1000 Park Drive z Lawrence, PA
Page 9
320 appliance cable with a minimum rating of 10 AMPs.
5.
WARNING!
Before inserting the Power Adapter, verify that the power on the unit is appropriate for your AC line voltage source.
Mounting instructions:
The FlexPoint Fiber Converter can be
a
Fiber Optic Cable Attachment:
Connect the fiber cables between the FlexPoint T1/E1 converters. The transmit (Tx) must attach to the receive side and the receive (Rx) must attach to the transmit side.
Note: Use fiber cables that are compliant with the specifications that are outlined in fiber cable specifications.
Copper Cable Attachment:
Connect to the
Page 3
TRADEMARKS
All
FEDERAL COMMUNICATIONS COMMISSION AND CANADIAN DEPARTMENT OF COMMUNICATIONS RADIO FREQUENCY INTERFERENCE STATEMENTS
This equipment generates, uses, and can radiate radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interference to radio communication. It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in subpart J of Part 15 of FCC rules, which are designed to provide reasonable protection against such interference when the equipment is operated in a commercial environment. Operation of this equipment in a residential area is likely to be cause interference, in which case the user at his own expense will be required to take whatever measures may be necessary to correct the interference.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This digital apparatus does not exceed the Class A limits for radio noise emission from digital apparatus set out in the Radio Interference Regulation of the Canadian Department of Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numéirques de las classe A prescrites dans le Règlement sur le brouillage radioélectrique publié par le ministère des Communications du Canada.
Page 10
Note: Use copper cables that are compliant with the specifications that are outlined in copper cable specifications.
Coax E1 Connector
Attach the BNC to the FlexPoint T1/E1 converter and attach the other end of the BNC to the network equipment.
Note: Use copper cables that are compliant with the specifications that are outlined in copper cable specifications.
Switch Settings:
UTP DCE/DTE setting
The UTP DCE/DTE switch is used to eliminate the need for crossover and custom cables to connect devices together when using the
|
|
| DCE |
|
|
|
|
|
| DTE | |||||||
| 1 |
|
|
|
|
|
|
|
|
|
| 1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
Twisted | RTIP |
|
| TTIP |
|
|
| Twisted | RTIP |
|
|
| TTIP | ||||
|
|
|
| ||||||||||||||
Pair #1 | 2 | RRING |
|
| TRING |
|
|
|
| Pair #1 | 2 | RRING |
|
|
| TRING | |
|
|
|
| ||||||||||||||
Twisted | 4 | TTIP |
|
| RTIP |
|
|
| Twisted | 4 | TTIP |
|
|
| RTIP | ||
|
|
|
| ||||||||||||||
Pair #2 | 5 | TRING |
|
| RRING |
|
|
|
| Pair #2 | 5 | TRING |
|
|
| RRING | |
|
|
|
| ||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
T1/E1 Copper line configuration settings
The T1/E1 copper line codes and line lengths are configured using dip switches located on the side of the FlexPoint T1/E1 media converter.
Page 4
NORMAS OFICIALES MEXICANAS (NOM)
ELECTRICAL SAFETY STATEMENT
1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado.
2.Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura.
3.Todas las advertencias en el aparato eléctrico y en sus instrucciones de operación deben ser respetadas.
4.Todas las instrucciones de operación y uso deben ser seguidas.
5.El aparato eléctrico no deberá ser usado cerca del
6.El aparato eléctrico debe ser usado únicamente con carritos o pedelstales que sean recomendados por el fabricante.
7.El aparato eléctrico debe ser montado a la pared o al techo sólo como sea recomendado por el fabricante.
8.
9.El aparato eléctrico debe ser situado de tal manera que su posición no interfiera su uso. La colocación del aparato eléctrico sobre una cama, sofá, alfombra or superficie similar puede bloquea la ventilación, no se debe colocar en libreros o gabinetes que impidan el flujo de aire por los orificios de ventilación.
10.El equipo eléctrico deber ser situado fuera del alcance de fuentes de calor como radiadores, registros de calor, estufas u ostros aparatos (incluyendo amplificadores) que producen calor.
11.El aparato eléctrico deberá ser connectado a una fuente de poder sólo del tipo descrito en el instructivo de operación, o como se indique en el aparato.
|
|
| Page 11 |
|
|
|
|
Line Type | Port Type | Distances | Switch Positions | ||||
|
|
|
| 1 | 2 | 3 | 4 |
T1 | 0’ - 133’ | B | B | B | B | ||
T1 | 133’ - 266’ | B | B | B | A | ||
T1 | 266’ - 399’ | B | B | A | B | ||
T1 | 399’ - 533’ | B | B | A | A | ||
T1 | 533’ - 655’ | B | A | B | B | ||
T1 | 0 dB | B | B | B | B | ||
T1 | B | A | B | A | |||
T1 | B | A | A | B | |||
T1 | B | A | A | A | |||
E1 | 75 Ω | Coax/BNC Standard | A | B | B | B | |
E1 | 120 Ω | Standard | A | B | B | A | |
E1 | 75 Ω | Coax/BNC Extended | A | B | A | B | |
E1 | 120 Ω | Extended | A | B | A | A | |
Operational switch settings and functions
The following operational switches located on the front of the FlexPoint T1/E1 converter are to assist in installation and fault isolation.
|
|
| Local Dual Loop Back |
Normal |
|
| Remote & Local Loop Back |
|
|
| Force 1’s to Fiber |
|
|
| Force 1’s Copper |
|
|
| Page 5 |
12.Precación debe ser tomada de tal manera que la tierra fisica y la polarización del equipo no sea eliminada.
13.Los cables de la fuente de poder deben ser guiados de tal manera que no sean pisados ni pellizcados por objetos colocados sobre o contra ellos, poniendo particular atención a los contactos y receptáculos donde salen del aparato.
14.El equipo eléctrico debe ser limpiado únicamente de acuerdo a las recomendaciones del fabricante.
15.En caso de existir, una antena externa deberá ser localizada lejos de las lineas de energia.
16.El cable de corriente deberá ser desconectado del cuando el equipo no sea usado por un largo periodo de tiempo.
17.Cuidado debe ser tomado de tal manera que objectos liquidos no sean derramados sobre la cubierta u orificios de ventilación.
18.Servicio por personal calificado deberá ser provisto cuando:
A:El cable de poder o el contacto ha sido dañado; u
B:Objectos han caído o líquido ha sido derramado dentro del aparato; o
C:El aparato ha sido expuesto a la lluvia; o
D:El aparato parece no operar normalmente o muestra un cambio en su desempeño; o
E:El aparto ha sido tirado o su cubierta ha sido dañada.
Page 12
Local
This switch will set the FlexPoint T1/E1 converter in a
Loopback Enabled
Remote
This switch will allow the entire fiber segment to be tested at either of the FlexPoint T1/E1 converters without having to set switches on both units. When set in this mode of operation the local unit is switched in a local
aremote
Remote Loop Request
Over Fiber
Page 6
