Black Box Rackmount Kit manual December RMK19WX

DECEMBER 1999

RMK19WX

You can use this Rackmount Kit to mount Unit A or Unit B of a ServSwitchTMWizard Multimedia KVM Extender

(our product code ACU1600A) in 1U of vertical spacein a 19" rack. Each of these Kits consistsof a front- paneled rack sHelf and a pair of countersunk screws.To use this Kit to mount an Extender Unit, take these steps, referring to Figure 1 on the other side of this page:

1.Place the Extender Unit on the Kit shelf so that the RJ-45jack and auxiliary LEDs on its side are facing forward and are aligned with the cutouts in the shelf'sfront panel. In this position, the two screwholeson the bottom of the Unit should be lined up with the matching holes on the bottom of the shelf.

2.Screwthe two screwsincluded with the Kit through the holes in the shelf, into the bottom of the Unit.

3.Once you'veattached the Unit to the shelf, match the holes at the ends of the shelf'sfront panel to an appropriate set of matching holes on your equipment rack. Screw the Unit assemblyto the rack using your own screws,bolts, cage nuts, etc. (not included).