Chapter 3: Installation
724-746-5500 | blackbox.com Page 23
3.2.6.2 To link Agility Dual units using fiber optic links1 Insert an optional SFP (multi mode or single mode) fiber module into the aperture on the ServSwitch Agility Dual front panel.
See Figure 3-14.
ServSwitch Agility Dual
™
BL A C K BO X K V M o I P EXTENDER
REMOTE
ServSwitch Agility Dual
™
BL A C K BOXKVMoIP EXTENDER
REMOTE
Figure 3-14. Insert an appropriate single mode or muilti mode fiber module.
2 Connect the transmit and receive fiber links to the fiber module and close the latch over the link connectors to lock them into
place. See Figure 3-15.
Figure 3-15. Connect the transmit and receive fiber links to the module.
3 Connect the other end of the fiber links either to the other ServSwitch Agility Dual unit or to a fiber-equipped Gigabit Ethernet
switch, as appropriate. Note: The fiber links must be crossover cables.