Black Box 8 x 8 HDMI Matrix Switch Overview, Rear Panel, Page, 1Continued. Front-panelcomponents

Chapter 2: Overview

		Table 2-1 (Continued). Front-panel components.
Number	Component	Description
		Disables (mutes) video to selected channels.
8	Function Key — OFF	• Press the OFF button followed by any destination channel.
		• Press button 1 through 4 to select the output destination. The display will show “0” for the selected channel indicating no video
		selected.

9Function Key — RECALL (preview)

The system will show previously stored presets, up to a total of 16. Presets are stored in local memory using Source keys 1 through 8 or Destination keys 1 through 8 as the memory preset location.

•Press the RECALL button.

•Press 1 through 4 on either Source or Destination row.

•Press ENTER. The preset configuration will execute. Operation completes.

NOTE: Operation will abort if no keys are pressed within 5 seconds.

10	Function Key—Enter (or	Press ENTER to confirm entries.
	DEMO)

11Function Key—Memory (or SAVE)

The system will store presets, up to a total of 16. Presets are stored in local memory using Source keys 1 through 8 or Destination keys 1 through 8 as the memory preset location.

•Configure desired matrices.

•Press the memory button.

•Press 1 through 4 on either Source or Destination row.

•Press ENTER to ready memory location.

•Or press MEMORY again to cancel operation.

Operation completes.

NOTE: Operation will abort if no keys are pressed within 5 seconds.

12	Function Key — LOCK	• Press and hold the LOCK button for two seconds to lockout the front panel.
		• Press and hold the LOCK button for two seconds to re-enable the front panel.
13	Function Key — EDID	Press EDID to select new EDID mode and select source button #1 or #2 to change embedded EDID mode.
14	19" rackmount ears	Converts a desktop switch to a 19-inch rackmount switch. Brackets are included. Figure 2-2 shows rackmount bracket attached.

2.4.2 Rear Panel

5

6 4 3 2 1

Figure 2-3. Rear panel.

724-746-5500 blackbox.com Page 11