Radio Section

Balance and Fader Control

Balance control

To balance the sound level left/right:

Press the AUD button 2 until bal is

shown on the display.

Press rocker switch </> 7 on the left or right to adjust the sound impression

according to your personal preferences. Display 9 gives you a number bet- ween -9 and +9.

Fader control

To balance the front/rear sound level:

Press the AUD button 2 until fad is

shown on the display.

Press rocker switch </> 7 on the left or right to adjust the sound impression

according to your personal preferences. Display 9 gives you a number bet- ween -9 and +9.

Selecting a Station

With your car radio you can select stations from the FM (ultra-short wave) and FM-Tra- velstore level.

To select FM,

press the FM•T button 3 briefly. “FM” lights up on display 9 a.

To select FM-Travelstore,

press the FM•T button 3 briefly until “FM•T” is shown on display9 b. For more information on this function see chapter “Automatically Storing the Strongest Stations”.

Tuning in a Station Automatical- ly

Tuning in the following station

Press the </> rocker switch 7 on the

carried out quickly in the corresponding direction.

Manual Tuning

To manually tune in a station,

press the lo•m button 5 until “m” lights up on display 9 f.

You can now manually search for the desired stations via the </> buttons 7.

Adjusting the Station Seek Sensitivity

With this set you can modify the automatic station seek sensitivity in all wavebands.

If you want to search for strong stations only (reduced sensitivity):

Press the lo button 5 until “lo” lights up on display 9 e.

If you also want to search for weaker stations (increased sensitivity):

Note:

If the rocker switch < > is kept depressed (on the left or right), the set quickly advances to the final values (+7/+9 or -7/-9) or to the “0” position.

right. The car stereo automatically starts searching for the next station.

Tuning in the previous station

Press the </> rocker switch 7 on the left. The car stereo automatically starts

searching for the previous station.

If the </> rocker switch 7 is kept de- pressed on the right or the left, the sta- tion seek operation continues to be

Press the lo button 5 once again; the “lo” indication on display9 e goes out.

Mono/Stereo Operation

If the lo•m button 5 is pressed longer than 2 secs. but less than 8 secs., the set swit- ches over to mono and the stereo symbol (h) goes off.

If the lo•m button 5 is pressed longer than

16

Page 7
Image 7
Blaupunkt ACD 9430 operating instructions Radio Section