Blaupunkt ACR 3250 Receiving traffic programme stations with RDS-EON, Recalling stored stations

Recalling stored stations

You can recall any stored station at the touch of a button.

•Select the memory bank by toggling the FM button until the desired level ap- pears in the display.

•Press the corresponding preset button until the display shows the desired pre- set button.

Receiving traffic programme stations with RDS-EON

Many FM broadcasters offer traffic mess-	To switch the priority on or off:
ages for their service area at regular inter-	• Press the TA button.
vals.	When pressing TA while a message is being
All traffic programme stations transmit a spe-
	broadcast, this message will be interrupted.
cial carrier signal alongside their program-
	The unit will then switch back to the previous
mes, which is decoded by your car radio. If
	condition. The priority for other traffic mes-
this signal is identified, “TP” will appear in the
	sages remains active.
display (Traffic Programme).
In addition to these, there are also stations	Warning beep
which do not actually transmit traffic pro-
grammes themselves, but by using RDS-	If you leave the reception area of the traffic
EON they offer the possibility to receive the	programme station currently tuned into, you
traffic messages broadcast by another traffic	will hear a warning beep after approximately
programme station in the same radio net-	30 seconds.
work. If you listen to one of these stations	This alarm tone will also be released when
(e.g. NDR3), “TP” will appear in the display	pressing a preset button which has no traffic
as soon as the priority for traffic programme	programme allocated to it.
stations has been activated, i.e. “TA” must be
displayed.	Switching the warning beep off
If a traffic announcement is broadcast, the	a) Tune into another station offering traffic
radio will automatically switch to the linked
	information:
traffic programme station (in this case,
	•	Press or
NDR2) for the duration of the message and
return to the original programme (NDR3)	• press one of the preset buttons 1-6
afterwards.		and tune into a stored traffic pro-
		gramme station.
Traffic announcement priority	Alternatively:
on/off	b) Switch off the priority for traffic an-
If the priority for traffic announcement pro-	nouncements:
	•	Press TA.
grammes is activated, “TA” will light up in the

display.

“TA” will disappear from the display.

20