Blaupunkt C32, DJ32 operating instructions Adjusting the volume, Setting the power-on volume

SWITCHING ON/OFF ADJUSTING THE VOLUME

Switching on by inserting a cassette

If the unit is switched off and there is no cassette inserted in the drive,

➮Gently insert the cassette with the open side facing towards the right into the drive until you feel some resistance.

The cassette will be drawn automatically into the drive.

You must not hinder or assist the drive as it draws in the cassette.

The unit switches on. Cassette playback begins.

Adjusting the volume

The system volume can be adjusted in steps from 0 (off) to 66 (maximum).

To increase the volume,

➮turn the volume control 3to the right.

To decrease the volume,

➮turn the volume control 3to the left.

Setting the power-on volume

You can set the unit's default power-on volume.

➮Press the MENU button :.

➮Keep pressing the or button 8until “ON VOL” appears in the display.

➮Set the power-on volume using the and buttons 8.

To help you adjust the volume more easily, the volume will be increased / decreased as you make your changes.

If you change the setting to “LAST VOL”, the power-on volume will be the same as the volume level that was set before the unit was last switched off.

Note:

●To protect your hearing, the maxi- mum power-on volume that can be set for “LAST VOL” setting is “38”. If the volume was higher before the unit was switched off and “LAST VOL” was selected, the volume will be set to “38” the next time the ra- dio is switched on.

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS DANSK

31