Play is interrupted and “PAUSE” appears in the display.
➮Press button 3 
>again to re- sume play.
Switching the Radio Monitor On / off
Note:
●The radiomonitor can only be set if a cassette is being played.
➮Press the MENU button 8.
➮Press the 
or 
button : until “RM ON” or “RM OFF” appears in the display.
➮Press the 
or 
button :to switch the radio monitor on or off.
➮Press the MENU button 8or OK
;.
Skipping Blank Tape
You can automatically skip sections of blank tape that last longer than 10 sec- onds. This requires the blank skip func- tion to be activated.
Note:
●The blank skip can only be set if a cassette is being played.
Switching Blank Skip On / Off
➮Press the MENU button 8.
➮Press the 
or 
button : until “BLANK SKIP” appears in the dis- play.
CASSETTE MODE
➮ Press the 
or 
button : to
switch the blank skip function on or | ENGLISH |
| |
off. |
|
➮ Press the MENU button 8or OK |
|
;twice. |
|
Selecting Tape Type |
|
If you are playing a “Metal” or “CrO” FRANÇAIS | |
2 |
|
tape, you should set the tape type se- |
|
lector to “MTL ON”. | ESPAÑOL |
To select the tape type | |
➮ Press button 1 MTL >. | |
Either “MTL ON” or “MTL OFF” will ap-
pear briefly in the display. | PORTUGUÊS |
|
Dolby* B Noise Reduction
You should switch on the Dolby func- tion whenever you play tapes recorded using the Dolby B process.
➮ Press button 6 
>.
When the Dolby function is switched on, 
shows in the display.
*Noise reduction system manufactured un- der licence from Dolby Laboratories. The word Dolby and the
15
