Blaupunkt Casablanca CD51 Automatic sound, Setting the volume of the confirmation beep

VOLUME ADJUSTMENT

If a traffic announcement is received during a telephone call or whilst a nav- igation announcement is being made, the traffic announcement will only be played after the call or voice output is finished.

If you are already listening to a traffic announcement and a telephone call arrives or the navigation system wish- es to make a voice output, the traffic announcement will first be heard. Once it is finished you can then listen to the call or the voice output.

You can set the volume level at which the telephone calls and navigation voice output will first be heard.

➮Press the MENU button 8.

➮Keep pressing the button :un- til “TEL/NAVI VOL” appears in the display.

➮Set the mute level using the and buttons :.

➮When you have finished making your changes, press the MENU 8 or OK ;button.

Note:

You can directly adjust the volume of telephone calls and navigation voice output using the volume control 2.

Automatic sound

This feature automatically adjusts the volume of the car radio to suit the speed at which the vehicle is travelling. In or- der for this to work, your car radio must be connected in the manner described in the installation instructions.

The automatic sound level can be ad- justed in six steps from (0 to 5).

➮Press the MENU button 8.

➮Keep pressing the button :un- til “AUTO SOUND” appears in the display.

➮Set the automatic sound level us- ing the and buttons :.

➮When you have finished making your changes, press the MENU 8 or OK ;button.

Note:

The optimum setting for the speed-re- lated automatic sound adjustment fea- ture depends on how noise develops in your particular vehicle. You will have to test various settings in order to discov- er which is best suited to your vehicle.

Setting the volume of the confirmation beep

For some functions, you will hear a con- firmation beep if you keep a button pressed for longer than two seconds, e.g. after storing a radio station to a sta- tion button you will hear a confirmation beep. You can set the volume of this beep.

➮Press the MENU button 8.

➮Keep pressing the button :un- til “BEEP” appears in the display.

➮Set the volume using the and buttons :. “0” means beep off, “9” means maximum beep volume.

➮When you have finished making your changes, press the MENU 8 or OK ;button.

36