Blaupunkt CD34 7 644 191 310, CD34 7 644 176 310 Storing stations automatically Travelstore

RADIO MODE

Storing stations

Storing stations manually

➮Select the memory bank (i.e. FM1, FM2, FMT) that you want or one of the wavebands (MW or LW).

➮Tune into the station that you want.

➮Press and hold down one of the station buttons 1 - 6 9 for longer than two seconds to assign the sta- tion to that button.

Storing stations automatically (Travelstore)

You can automatically store the six sta- tions providing the best reception in the region (only FM). The stations are stored in the FMT memory bank.

Note:

●Any stations that were previously stored in this memory bank are de- leted in the process.

➮Press and hold down the BND•TS button 4 for longer than two sec- onds.

The storing procedure begins. “FM TSTORE” appears in the display. After the process has completed, the radio will play the station that is stored in memory location 1 of the FMT memory bank.

Listening to stored stations

➮Select the memory bank or wave- band.

➮Press the station button 1 - 6 9 that corresponds to the station that you want to listen to.

Scanning receivable stations (SCAN)

You can use the scan function to briefly play all the receivable stations. You can set the scanning time in the menu to between 5 and 30 seconds.

Starting SCAN

➮Press and hold down the MENU button 8 for longer than two sec- onds.

Scanning begins. “SCAN” appears briefly in the display followed by a flash- ing display of the current station name or frequency.

Cancelling SCAN and continuing listening to a station

➮Press the MENU button 8.

Scanning stops and the radio continues playing the station that it tuned into last.

Setting the scanning time

➮Press the MENU button 8.

➮Press the or button 7 re- peatedly until “SCAN TIME” ap- pears in the display.

➮Set the scanning time that you

want using the buttons 7.

36