Blaupunkt CD52 Switching to radio mode, Switching the RDS function on/ off, Tuning into a station

RADIO MODE

Switching to radio mode

If you are in CD, CD changer/Compact Drive MP3 or AUX mode,

➮press the FM TS button 5 for FM radio mode.

or

➮press the AM button ?for AM ra- dio mode.

Switching the RDS function on/ off

➮To use the RDS functions, press the RDS button 4.

The RDS function is active when RDS lights up in the display with a symbol.

Selecting the waveband / memory bank

This unit can receive programmes broadcast over the FM and AM wave- bands. There are three memory banks (FM1, FM2 and FMT) for the FM wave- band and two memory banks (AM and AMT) for the AM waveband.

Six stations can be stored in each mem- ory bank.

To switch between the FM memory banks,

➮briefly press the FM TS button 5 repeatedly until the required mem- ory bank appears in the display.

To switch between the AM memory banks,

➮briefly press the AM button ?re- peatedly until the required memory bank appears in the display.

Tuning into a station

There are various ways of tuning into a station.

Automatic seek tuning

➮Press the or button :.

The unit tunes into the next receivable station.

Tuning into stations manually

You can also tune into stations manual- ly.

➮Press the or button :.

Note:

You can only tune into stations manual- ly on the FM waveband if the RDS and PTY functions are deactivated.

Setting the sensitivity of station seek tuning

You can choose whether to only tune into stations with a strong reception or to also tune into those with a weak re- ception.

➮Press the MENU button 8.

➮Keep pressing the button : un- til “SENS”appears in the display.

➮Press the button :.

The display shows the currently set sen- sitivity level. “SENS 6”means that the tuner is set to the highest sensitivity setting. “SENS 1”is the lowest setting.

➮Set the required sensitivity using the or button :.

ENGLISH FRANÇAIS ESPAÑOL PORTUGUÊS

11