Radio Reception
Seek Tuning
ENGLISH | 1. | Press the AM | or | FM to select the desired band. |
| ||||
|
| FM I ➜ FM II ➜ FM III | ||
|
| or |
|
|
| 2. | AM I ➜ AM II |
|
|
| Press the | or | to tune in stations. Seek tuning auto- | |
matically stops at a broadcasted frequency.
When tuning to FM stereo broadcasting stations, the
“
” stereo indicator will light up in the display window.
Manual Tuning
1. | Press the | AM | or FM | to select the desired band. |
2. | Press the |
| or | and hold for more than 0.5 second |
to activate the manual tuning mode. Press again to tune in to stations.
After 4 seconds duration of completing Manual Tuning, the tuning control will revert to the Seek Tuning mode.
Scan Tuning
1. | Press the | AM | or FM to select the desired radio band. |
2. | Press the |
| . |
The unit will scan the selected radio band for stations.
Press the 
again to stop Scan Tuning and remain on this selected frequency.
Tips
When tuned in to broadcasting stations, the antenna indicator 
on the display window is lit.
Preset Scan Tuning
1. | Press the | AM | or FM to select the desired radio band. |
2. | Press the |
| . |
The unit will scan preset memory for the 12 stations from the AM I/AM II band or the 18 stations from the FM I or FM
IIand FM III bands. The unit will stop at each preset sta- tion for 8 seconds, before continuing to the next preset sta- tion.
Press the 
again to stop Preset Scan Tuning and re- main this on the selected frequency.
Memorizing Stations Automatically (Travel Store)
1. | Press the | AM | or | FM | to select the desired band. |
2. | Hold the | AM | or | FM | pressed for longer than 2 seconds. |
Up to 6 stations with strong signals will be automatically stored in preset memory for the selected band.
Note
This function is available for FM III and AM II.
Memorizing Only the Desired Stations
A total of 30 stations (18 for the FM I, FM II and FM III, 12 for AM I and AM II) can be stored in preset memory.
1. | Press the | AM | or FM | to select the desired radio band. |
2. | Press the |
| or | to tune in stations. |
3. | Press and hold the desired preset memory button 1 - | |||
6/ | for about 2 seconds until the frequency indicator |
flashes twice.
The number of the pressed preset memory button appears on the display window.
Note
If/when you store another station on the same preset number button, the previously stored station is replaced with new one.
Receiving the Memorized Stations
1. | Press the | AM | or | FM to select the desired radio band. |
2. | Press the | 1 | - 6/ | momentarily. |
Local/Distant (LO/DX) Selection
This feature is used to select the strength of the signals at which the radio will stop during Seek Tuning.
Press the LD/SENS for more than 2 seconds to select the Local setting and only the strongest (local) stations will be received. The “lo” indicator appears in the display window.
Pressing again for 2 seconds will select the Distant setting and the radio will stop at a wider range of signals, including weaker more distant stations. The “lo” indicator will go out on the dis- play window.
The “Distant” setting is the recommended default mode of re- ception.
