•Tune into a station with the rocker switch (either automatically /
or manually <</>>).
•Press the desired preset button until the radio resumes play after the muting (takes approx. 2 seconds) or until you
hear a beep.
Now the station has been stored.
The display will indicate which preset but- ton is currently activated.
Automatically storing the stron- gest stations with Travelstore
You can automatically store the six FM sta- tions with the most powerful signals in your current reception area sorted according to their signal strength. This function is parti- cularly convenient on longer trips.
•Press the BA/TS button for 2 seconds.
If desired, stations can also be stored ma- nually in the Travelstore bank (see "Storing stations").
Recalling stored stations
You can recall any stored station at the touch of a button.
•Select the waveband by pressing BA/ TS. For FM, also choose the correspon- ding memory bank by pressing the BA/ TS button as many times as necessary until the desired bank appears in the dis- play.
•Press the corresponding preset button briefly to recall the station.
Scanning stored stations with Preset Scan
You can scan all of the stored stations on any of the wavebands.
To start Preset Scan:
•Press SCA for approx. 2 seconds.
All of the stations stored on the waveband will be scanned one after the other. "PS- SCAN" will appear in the display, alterna- ting with the station name or frequency. The abbreviation for the station currently play- ing (e.g. P1) will flash in display field 1.
Continue listening to a scanned station/ end Preset Scan:
•Press SCA briefly.
Scanning stations with
Radio Scan
You can scan through all of the stations in your reception area.
To start the Scan function:
•Press SCA briefly.
The scanned frequency or the station name will start flashing in the display.
During the scanning process "SCAN" will appear in the display.
To select a scanned station/switch off the Scan function:
•Press SCA briefly.
Changing the scan time
The scan time can be selected from bet- ween 5 to a maximum of 20 seconds.
If you would like to alter the scan time, plea- se refer to the section on "DSC pro- gramming - SCANTIME".
Selecting the automatic tuning sensitivity
You can alter the automatic tuning sensiti- vity.
If "lo" is displayed, the radio will only pick up strong, local stations (low sensitivity).
30