41
ENGLISH DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Sampling All the Tracks on a
Cassette (SCAN)
➮Hold down the OK button ; for
longer than two seconds.
“CAS SCAN” appears in the display.
Samples from all the tracks on the tape
are played in ascending order.
To halt the scan
➮Press the OK button ; a second
time.
The track that is currently being sam-
pled will continue playing.
Note:
●The duration of samples can be
adjusted. Refer to the section on
“Setting Sample Time” under “Ra-
dio Operation”.
●To use the S-CPS, RPT and SCAN
functions, there must be a pause of
at least three seconds between the
tracks on the cassette.
Fast Winding
Fast forward
➮Press the button :.
“FORWARD” appears in the display.
Fast rewind
➮Press the button :.
“REWIND” appears in the display.
Stopping fast winding
➮Press the OK button ;.
Play continues.
Note:
●While the tape is being fast wound,
the last radio station tuned in can
be listened to. This requires the
“Radio monitor” function to be
switched on.
Pausing During Play
To interrupt tape play
➮Press button 3 >.
Play is interrupted and “PAUSE” ap-
pears in the display.
➮Press button 3 > again to
resume play.
Switching the Radio Monitor
On / off
Note:
●The radiomonitor can only be set if
a cassette is being played.
➮Press the MENU button 8.
➮Press the or button : until
“RM ON” or “RM OFF” appears in
the display.
➮Press the or button : to
switch the radio monitor on or off.
➮Press the MENU button 8 or OK
;.
CASSETTE MODE