Notice:
Should you tune in a station which has al- ready been stored before, then the corre- sponding preset position and memory bank will briefly flash in the display.
Automatically storing the strongest stations with Travelstore
You can automatically store the six most powerful FM stations of your current recep- tion area sorted according to their signal strength. This function is particularly conven- ient on longer trips.
•Press the FMT or BND button for 1 sec.
The six strongest FM stations will be auto- matically stored on the memory bank “T” (Travelstore). When this process has been completed, the radio will play the first sta- tion stored on preset 1.
If desired, stations can also be stored man- ually on the Travelstore bank (see “Storing stations”).
Recalling stored stations
You can recall any stored station at the touch of a button.
•Select the memory bank with FMT or BND.
•Press the corresponding preset button briefly to recall the station.
Scanning stored stations with Preset Scan
You can have all of the stored stations briefly scanned on all wavebands.
To start Preset Scan:
•Press SC for approximately 1 sec.
All of the stored stations to be received will be scanned one after the other.
To select a scanned station and switch off Preset Scan:
•Press SC briefly.
Note:
If “TA” shows on the display panel, the sys- tem will scan the stored traffic stations only.
Scanning stations with Radio- Scan
You can also scan all stations which can currently be received.
To start the Scan function:
•Press SC briefly.
The scanned frequency or the station name will start flashing in the display. During the actual scanning process
To select a scanned station and switch off Radio-Scan:
•Press SC briefly.
If no station is selected, the scan function will be automatically switched off after the frequency band has been run through com- pletely. The unit will tune in the station lis- tened to before starting the scan.
38