Detachable control panel | Switching on/off |
The device switches off.
All the current settings are saved.
Any CD already inserted in the device re- mains there.
Attaching the control panel
Push the control panel into the guides of the device from the left to the right.
Carefully push on the left side of the control panel until it clicks into place.
Note:
When attaching the control panel, make sure you do not push on the display.
If the device was still switched on when you detached the control panel, it will automati- cally switch on with the last setting activat- ed (radio, CD, CD changer or AUX) when the panel is replaced.
Switching on/off
There are various ways of switching the de- vice on/off:
Switching on/off using the vehicle
ignition | ENGLISH |
| |
The device will switch on/off simultaneous- |
|
ly with the ignition if the device is correctly |
|
connected to the vehicle’s ignition and you |
|
did not switch the device off by pressing |
|
button 2. |
|
Switching on/off using button 2
To switch on the device, press button
2.
To switch off the device, press and hold down button 2 for longer than two seconds.
The device switches off.
Note:
To protect the vehicle battery, the de- vice will switch off automatically after one hour if the ignition is off.
Switching on with CD draw-in
If the device is switched off and no CD is in the drive,
gently insert the CD with its printed side uppermost into the drive 4until you feel some resistance.
The drive draws in the CD automatically.
You must not hinder or assist the drive as it draws in the CD.
The device switches on and CD playback starts.
35
