RADIO MODE
Switching REGIONAL on/off
➮Press the MENU button 7.
➮Press the 
or 
button 6 repeat- edly until “REG”appears in the dis- play. “OFF”or “ON”is displayed alongside “REG”.
➮To switch REGIONAL on/off, press the 
or 
button 6.
➮Press the MENU button 7.
Selecting the waveband / memory bank
You can use this device to receive pro- grammes broadcast over the FM fre- quency range as well as the MW and LW (AM) wavebands. There are three memory banks available for the FM waveband (FM1, FM2 and FMT) and one for each of the MW and LW wave- bands. Six stations can be stored in each memory bank.
To switch between the FM memory banks (FM1, FM2 and FMT) and the MW and LW wavebands,
➮briefly press the BND•TS button
4.
Tuning into a station
There are various ways of tuning into a station.
Automatic station seek tuning
➮Press the 
or 
button 6.
The radio tunes into the next receiva- ble station.
Tuning into stations manually
You can also tune into stations manual- ly.
Note:
●You can only tune into stations manually if the RDS function is de- activated.
➮Press the 
or 
button 6.
Browsing through broadcasting networks (only FM)
If radio stations provide several pro- grammes, you have the option of brows- ing through their “broadcasting net- works”.
Note:
●The RDS function must be activat- ed before you can use this feature.
➮Press the 
or 
button 6 to switch to the next station on the broadcasting network.
Note:
●When using this feature, you will only be able to switch to stations that you have received once before already. To receive the stations, use the scan function or the Travel- store function.
Setting the sensitivity of station seek tuning
You can choose whether the radio should only tune into stations providing good reception or whether it can also tune into those with a weak reception.
➮Press the MENU button 7.
44
