Blaupunkt MP36 Adjusting the front/rear volume distribution fader, Adjusting the sub-out level

Sound Preamplifier output

Setting the left/right volume distribution (balance)

To adjust the left/right volume distribution (balance),

press the AUDIO button 5. "BASS" appears on the display.

Press the or button :repeatedly until "BAL" appears on the display with the current setting.

Press the or button :to adjust the balance (right/left).

Press the AUDIO button 5to exit the menu.

Adjusting the front/rear volume distribution (fader)

To adjust the front/rear volume distribution (fader),

press the AUDIO button 5. "BASS" appears on the display.

Press the or button :repeatedly until "Fader" appears on the display with the current setting.

Press the or button :to adjust the volume distribution front/rear.

Press the AUDIO button 5to exit the menu.

Preamplifier output (Preamp-Out/Sub-Out)

You can use the preamplifier outputs (Preamp-Out) of the car sound system to connect external amplifiers. In addition, you can connect an amplifier for operating a subwoofer to the integrated dynamic low- pass filterof the device (level and cutoff fre- quency can be adjusted).

For this purpose, the amplifiers must be connected as described in the installation instructions.

Adjusting the sub-out level

The sub-out level can be adjusted in 8 incre- ments (0 to +7).

Press the AUDIO button 5. "BASS" appears on the display.

Press the or button : repeat- edly until "SUBOUT" appears on the display.

Press the or button :to adjust a value between 0 and +7.

When you have finished making your chang- es,

press the AUDIO button 5twice.

Adjusting the sub-out cutoff frequency

You can select 1 of 4 settings: 0 Hz, 80 Hz, 120 Hz and 160 Hz.

Press the AUDIO button 5. "BASS" appears on the display.

Press the or button : repeat- edly until "SUBOUT" appears on the display.

60