EQUALIZER
➮Press the OK button :.
A countdown is shown in the display. Afterwards you will hear a test sound and calibration begins.
Note:
Follow the instructions shown in the dis- play during calibration!
Manually adjusting the equalizer
Notes on adjusting the settings
We recommend you use a CD that you are familiar with for making changes to the settings.
Before adjusting the equalizer, set the sound and volume distribution settings to zero and deactivate
➮Listen to a CD.
➮What kind of impression does the sound make?
➮Now refer to the “Sound impres- sion” column in the table entitled “Help adjusting the equalizer”.
➮Adjust the equalizer values as de- scribed in the “Measures” column.
Making adjustments
➮Press the DEQ button ?.
➮Press the 
or 
button 7 repeat- edly until “MANUAL EQ” appears in the display.
➮Press the OK button :.
➮Press the 
or 
button 7 repeat- edly until the equalizer that you want to configure (“USER EQ1”, “USER EQ2” or “USER EQ3”) ap- pears in the display.
➮Press the OK button :.
➮Press the 
or 
button 7 repeat- edly until the equalizer band that you want to configure (“LOW EQ1”, “LOW EQ2”, “HIGH EQ1”, “HIGH EQ2” or “HIGH EQ3”) appears in the display.
➮Press the OK button :.
➮Press the 
or 
button 7 repeat- edly until the frequency that you want is displayed.
➮Press the OK button :.
The top line displays the GAIN and the quality factor “Q”. The gain setting flash- es. You can use the quality factor to set the width of the filter. The higher you set the value for the quality factor the more directly the filter will be applied to the selected frequency.
To adjust the gain,
➮press the 
or 
button 7. To adjust the quality factor,
➮press the 
button 7.
The quality factor setting flashes.
➮Press the 
or 
button 7 repeat- edly until the setting that you want is displayed.
36
