• | Press the KeyCard in, which releases | Optical indication for extra | |
| the card and puts it in the proper positi- | security | |
| on for being removed. | When the car is stationary, the KeyCard | |
• | Remove the first KeyCard and insert | ||
tongue can be switched to flash for extra anti- | |||
| the new one while “CHANGE” is still | ||
| theft security. | ||
| being displayed. | ||
| For this, the following requirements must be | ||
Now you can also use the new KeyCard for | |||
fulfilled: | |||
operating your unit. | Permanent 12 V supply and the + ignition | ||
A maximum of two cards can be used per set. | lead must be connected correctly (as illustra- | ||
When trying to “define” a third one, the | ted in the installations instructions). | ||
system will automatically delete the access | “LED 1” must be adjusted in the DSC mode. | ||
authorisation of that KeyCard which was not | Please refer to chapter “DSC programming - | ||
used for the “learning” process. | LED”. | ||
Displaying the radio pass data |
| ||
You can use the KeyCard 1 supplied with the |
| ||
unit to display the individual radio pass data |
| ||
such as the model name, the type number |
| ||
(7 6 ...) and the serial number: |
| ||
• | Press and hold down preset buttons 1 |
| |
| and 6 while switching on the unit. |
| |
• | Press the M•L button within 2 seconds. |
| |
The radio pass data will move through the |
| ||
display several times. |
| ||
To quit the function: |
| ||
• | Press any button. |
| |
DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS
25
