If you do not make any adjustments to the tone within 8 seconds, the AUD mode will quit automatically.
LD - Loudness
Loudness boosts the bass frequency at low volume.
Loudness on/off: Press AUD until you hear a beep.
:DSC (Direct Software Control) Using “DSC” you can adjust pro- grammable basic settings to suit your own personal preferences.
Refer to the section on “DSC pro- gramming” for more information.
;Clock display
When the unit is switched on press “DIS” briefly and the current time will appear in the display for approximately 8 seconds.
Additional function for clock display: Press and hold “DIS” until you hear a beep to display the time permanently. If you activate another function, the time will disappear from the display for approximately 8 seconds.
<Preset buttons 1 to 6 Radio mode
You can store up to six stations in each memory bank (I, II, and “T”). On MW and LW you can also store six stations each.
Storing stations
Tune the radio into the station you would like to store. Press the preset button on which you want to store this station (radio will switch to mute) and hold it down until the radio becomes audible again and you hear a beep.
Recalling stored stations
Select the waveband and, on FM the memory bank (“I”!, “II”, or “T”) as well. Then press the corresponding preset button
Additional function for the station preset buttons
Storing and recalling the PTY program type.
When PTY is active (“PTY” will appear in the display), then you can store and recall a program type (e.g. rock, pop, classical, news, etc.) on each for the station preset buttons for the FM wave- band.
CD mode
3/
-Pause
-PausePress the station preset button marked 3/
to interrupt CD playback. “PAU- SE” will appear in the display. Press button again to resume CD playback.
4/RPT - Repeat
Press the station preset button marked 4/RPT to repeat the CD track currently playing.
The track title will repeat until 4/RPT is pressed again or you press the rocker switch to select a different track.
5/MIX
Press the station preset button marked 5/MIX to switch to MIX playback for the CD currently playing. The tracks on the CD will be played in random order.
The current setting is briefly indicated in the display: “MIX CD” will flash briefly in the display and “MIX” will ap- pear in display field 3.
Press 5/MIX again to switch this function off.
27
DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS
