Blaupunkt RDM 169 Selecting a waveband, Station tuning, Switching between the memory banks FM

Selecting a waveband

The following wavebands are available:

UKW (FM)	87,5	- 108 MHz,
MW	531	- 1602 kHz and
LW	153	- 279 kHz

Press the “BA/TS” button to select the desi- red waveband.

Station tuning

Automatic seek tuning /

•Press /; the car radio will automati- cally search for the next station.

If you hold / pressed up or down on the rocker switch, seek tuning will speed up in the corresponding direction.

Automatic seek tuning

Up

Down

<</>> Up/down in short intervals

(on FM only if “AF” is switched off)

Manual tuning with << >>

You can also tune into a station manually. Important: AF and PTY must be switched off (i.e. the symbols do not light up in the display).

If necessary, deactivate these function by pressing “AF.TA” or “PTY”.

Manual tuning:

•Press << >>; the frequency will change in short intervals in the corresponding direction.

If you hold << >> pressed to the left or the right on the rocker switch, the frequency scan will speed up.

Scrolling through the broadcast networks (FM only)

You can use the << >> buttons to tune into stations in your reception area.

If it is possible to receive several program- mes in the same broadcast network, you can scroll through them in the forwards direc- tion by pressing >>, or backwards using the

<<button, e.g. NDR 1, 2, 3, 4, N-JOY, ...

For this to work properly you must have al- ready tuned into the stations at least once and “AF” must be active (lights up in the dis- play).

To do this, you can start the Travelstore seek operation:

•Press “BA/TS” for 2 seconds; the sy- stem will start to run through the fre- quency band.

If “AF” is not lit up,

•Press “AF.TA” until you hear a beep.

It is now possible to select stations using << >>.

Switching between the memory banks (FM)

You can switch between the memory banks I, II and T in order to store stations and re- call them later.

The currently selected memory bank will appear in the display.

•Press the “BA/TS” button as many times as necessary until the desired memory bank lights up in the display.

Storing stations

On FM, you can store six stations on the preset buttons 1 - 6 for each of the memory banks (I, II, T).

On MW/LW, you can also store six stations each.

•Select the appropriate waveband by pressing BA/TS.

42