Blaupunkt RDM 169 Switching from stereo to mono, Changing the scan time Scan, Tivity

Radio operation with RDS (Radio Data System)

All of the stations on the waveband select-	Switching from stereo to mono
ed and within reception range will be	(FM)
scanned one after the other. “FM SCAN” or	You can switch stereo/mono on menu level
“AM SCAN” will appear in the DOT display.
To select a scanned station and switch	2. If reception is poor, you may get better
	sound quality by switching from stereo to
off the Radio Scan function:
	mono. Each time the radio is switched on,
• Press the rocker switch briefly.
	stereo playback is activated automatically.
If you do not select a station, the scan func-	The unit will gradually switch to mono if the
tion will automatically switch off after the fre-
	signal received is not strong enough for ster-
quency band has been run through com-
	eo playback.
pletely. The unit will tune into the station you
	If you would like to switch to mono,
were listening to before you started the scan
	• press TU and NEXT one after the
function.
	other.
Changing the scan time (Scan)	The red arrow for mono will light up when
	you have switched to MONO.
The scan time can be set from between 5 to
	• Press MONO to switch between stereo
a maximum of 30 seconds.	to mono.
If you would like to alter the scan time,	The mode selected will appear briefly in the
please refer to the section on “DSC program- top line of the display.
ming - VAR (Various), SCAN (time)”.
Selecting the seek tuning sensi-	Automatic bandwidth adjust-
	ment (SHARX)
tivity	In the DSC menu, you can use the SHARX
You can alter the automatic seek tuning sen-
	function to adjust automatic bandwidth
sitivity separately for AM and FM.	switching in the FM frequency range. This
If you would like to alter the sensitivity level,	can be a great advantage when there are a

please refer to the section on “DSC program- large number of stations within your current

ming - TUN(er) S-DX, S-LO”). reception range.

Interference with strong adjacent stations	DEUTSCH
can be reduced to an absolute minimum if
you activate SHARX ON (default setting).
	ENGLISH
If necessary, refer to the section on “DSC
programming - TUN(er) SHRX”.

PTY - Program Type

PTY is an RDS service which an increasing	FRANÇAIS
number of broadcasting stations have be-
gun to offer. This feature allows you to se-
lect FM stations according to their program
	ITALIANO
type. After you have chosen the PTY of your
preference, the corresponding stations can
be selected by seek tuning.
other.	NEDERLANDS
Switching PTY on/off
• Press TU and NEXT one after the
• Press PTY to switch the function on or
	SVENSKA
off.
The red arrow will light up when PTY is
switched on. In addition, “PTY” will appear
under the top line in the display.
When the function is active, the program	ESPAÑOL
display, e.g. “Sport”. As long as PTY is ac-
type selected last will briefly appear in the
tive, “PTY” will appear permanently in the
display.	PORTUGUÊS

69