EQUALIZER
Equalizer
This unit is equipped with a digital sound calibration feature (DSA
The EQ1 - EQ3 equalizers can be cali- brated automatically with the help of a special calibration microphone. You can obtain this microphone from your Blau- punkt dealer. The automatically ascer- tained values can also be adjusted manually.
Furthermore, you can also set the equal- izer manually.
The following bands are available:
● | SUB LOW EQ | 32 | - 50 Hz | |
● | LOW EQ | 63 | - 250 Hz | |
● | MID EQ | 315 - 1,250 Hz | ||
● | MID/HIGH EQ | 1,600 - | 6,300 Hz | |
● | HIGH EQ | 8,000 - | 12,500 Hz | |
Switching the equalizer on/off
To switch the equalizer on/off,
➮press the DEQ+ button 5.
The equalizer menu is displayed.
To activate the equalizer,
➮Press the softkey 4 assigned to the “USER”or “PRE”display item and select an equalizer.
To deactivate the equalizer,
➮Press the softkey 4 assigned to the “OFF”display item.
Automatically calibrating the equalizer
You can electronically calibrate and store values for three different situations.
EQ 1 for the driver only
EQ 2 for the driver and front passenger
EQ 3 for the front and rear occupants
Hold the calibration microphone (avail- able as an accessory) in the appropri- ate position whilst the calibration is tak- ing place.
The position of the calibration micro- phone for situation 1 (e.g. for the driver alone) is at the height of the driver's head.
For situation 2, the calibration micro- phone is between the driver and pas- senger.
For Situation 3, it is in the middle of the vehicle interior (left/right, front/back).
Really quiet surroundings are required for the calibration. Any extraneous noise will distort the measured values.
56
