CASSETTE OPERATION
Skipping tracks (S-CPS)
To select the next or some other track,
➮press the 
button, 7, one or more times, until the number of tracks to be skipped appears on the display behind “CPS FF”.
“CPS FF” and the number of tracks to be skipped appear on the display. The tape winds fast forwards to the corresponding following track.
In order to select the previous track,
➮press the 
button, 7, one or more times, until the number of tracks to be skipped appears on the display behind “CPS FR”.
“CPS FR” and the number of tracks to be skipped appear on the display. The tape is fast rewound to the start of the present track or of the appropriate previous track.
Playing a track repeatedly
➮Press the softkey, 4, indicating “RPT”.
The present track is repeated. “RPT ON” ap- pears for a short time on the display, and RPT is displayed with light and shade reversed. While the tape is being rewound after the end of the track, “REWIND” appears in the dis- play.
To stop repeating the track,
➮press the softkey, 4, indicating “RPT” again.
Play continues as normal.
“RPT OFF” is shown on the display for a short time.
Sampling all the tracks on a cassette (SCAN)
➮Press the softkey, 4, indicating “SCA”.
Samples from all the tracks on the tape are played in ascending order.
In order to stop sampling the tracks,
➮press the softkey, 4, indicating “SCA” again.
The track that is currently being sampled will continue to be played.
Note:
●The duration of the samples can be ad- justed. Refer to the section on “Adjusting the Sample Duration” in the “Radio Op- eration” section.
●There must be a pause of at least three seconds between each of the tracks on the cassette in order to use the
Changing the display contents
You can choose between different display modes during cassette operation:
●Display of the elapsed play time (“ELAPSED”).
●Display of the remaining play time (“REMAIN”).
●Display of the tape counter (“COUNTER”).
●Display of the time (“CLOCK”).
➮To change between the various display modes, press the DIS button, :, as of- ten as necessary for the desired infor- mation to appear on the display.
Resetting the counter
To reset the counter,
➮hold down the DIS button, :, for longer than two seconds.
Fast winding
Fast forward
➮Press the
button, 7. “FORWARD” appears in the display.
ENGLISH
47
