KLS-G QUAD-LEG STATIONARY KETTLE
APPROVAL/STAMP
SHORT FORM SPECIFICATIONS
Provide Blodgett model KLS-80G (80 gallon) or KLS-100G (100 gallon) gas fired tri-leg stationary kettle. The unit shall have a double wall interior to form a steam jacket around the lower 2/3 of the kettle. The jacket enclosure shall contain distilled water which is factory sealed. The bottom of the kettle shall be of hemispherical design for superior heat circulation. Construction shall be of all welded satin finish 304 stainless steel. The unit shall have 6” stainless steel adjustable legs, a 2” tangent draw off valve, and a spring assist cover. The recessed control panel is located on the front ise of the unit in full view of the operator and is easy to use. The controls shall be integrally mounted and shall include a power switch, electronic ignition, direct immer- sion thermostat with a range of 165-265°F (74-130°C), a cook indicator light, pressure gauge, safety gas shutoff valve, pressure relief valve, low water light and low water shut off. Unit shall be ASME code stamped and National Board registered. Provide options and accessories as indicated.
MAXIMUM INPUT: | POWER SUPPLY: |
KLS-80G | 150,000 BTU | 115VAC, 1 phase, 60 Hz., 2-wire w/ground - 6' (1.8m) electric cord set furnished |
KLS-100G | 150,000 BTU | 208-240VAC, 1 phase, 60 Hz - Supply must be wired to unit |
GAS SUPPLY: | SHIPPING INFORMATION: |
One 1” male connection required | Approx. Weight: |
Minimum Inlet Pressure: | KLS-80G | 1000 lbs. (454 kg) |
Natural | 7.0" W.C. static to unit | KLS-100G | 1150 lbs. (522 kg) |
Propane | 11.0" W.C. static to unit | | |
NOTE: The company reserves the right to make substitutions of components without prior notice.
BLODGETT
44 Lakeside Avenue, Burlington, VT 05401
Toll Free: (800) 331-5842 • Phone: (802) 860-3700 • Fax: (802) 864-0183
Printed in U.S.A. | NOTE: FOR COMMERCIAL USE ONLY | P/N S00039 Rev F (12/06) |
