Blodgett KPT-DS manual Service Connections KLT-DS, Dimensions

SERVICE CONNECTIONS – KLT-DS

S STEAM SUPPLY: 3/4"IPS 5-30 PSI (34-205 kPa). OPTIONAL 5-45 PSI (34-310 KPa)

CONDENSATE RETURN: 1/2"IPS

HOT WATER: 3/8” O.D. TUBING TO FAUCET (OPTIONAL)

COLD WATER: 3/8” O.D. TUBING TO FAUCET (OPTIONAL)

DIMENSIONS

MODEL	CAPACITY	UNITS	A	B	C	D	E	F	G	H(2")	H(3")	J(2")	J(3")	K	L	M
KLT-20DS	20 gallons	inches	21	18	37	34.75	28.5	22	25.63	12	13.25	17	16.5	59.5	-	15.38
	76 litres	mm	535	460	940	885	724	559	651	305	337	432	419	1512		391
KLT-30DS	30 gallons	inches	24	20	37	37.75	31.5	20.75	27.13	12.5	14.25	15	14.5	62.5	-	15.38
	114 litres	mm	610	510	940	960	800	527	689	317	362	381	368	1588		391
KLT-40DS	40 gallons	inches	26	22.5	37	39.75	33.5	20.25	28.63	13	15.25	12.5	12	64	-	16.38
	152 litres	mm	660	570	940	1010	850	514	727	330	387	318	305	1626		416
KLT-60DS	60 gallons	inches	29.5	26	40.5	43.25	37	21.5	30.13	15.5	15.5	14.5	14	74	9.5	18.38
	227 litres	mm	750	660	1029	1100	940	546	765	394	394	368	356	1879	241	467
KLT-80DS	80 gallons	inches	33	28	42.5	46.75	40.5	20	32.63	14.5	16.25	12.5	12	76	11	19.88
	303 litres	mm	840	710	1080	1185	1030	508	828	368	413	318	305	1930	279	505
KLT-100DS	100 gallons	inches	35.5	30	42.5	49.25	43	21	39.25	18	20.25	10.5	10	79	12.5	21.5
	379 litres	mm	902	762	1080	1251	1092	533	997	457	514	267	254	2007	318	546

* Pressure reducing valve is required if incoming pressure exceeds 50 PSI (345 kPa).

SAFETY RELIEF VALVE

STRAINER AND STEAM TRAP (OPTIONAL)

2" VALVE: CLOSED 5.13[130] OPENED 6.88[175]

3” VALVE CLOSED 7.88[200] OPENED 10.13 [257]

K

JACKET

DRAIN VALVE

	DIMENSIONS ARE IN INCHES [MM]
L	L
	NOTE: 60 , 80 & 100 gallon kettles are supplied
	with 2 rear support legs
45°	1.63 (41)
	A
	Ø
	S

FLANGED FOOT DETAIL 4 EQUALLY SPACED Ø7/16" [11mm] HOLES ON 3 [76] B.C.

SPRING ASSISTED
COVER - OPTIONAL	FAUCET (OPTIONAL)
	M
70°	2" or 3" TANGENT
	DRAW OFF VALVE
	(OPTIONAL)
B
C	S
	F
	J
E	H
	G
D

4