Blodgett KLT-E Power Connection, Maximum Pressure, Shipping Information, Approval/Stamp, Blodgett

KLT-E TRI-LEG TILTING KETTLE

APPROVAL/STAMP

MODEL

A

B

C

D

E

F

G

H

J (2”)

J (3”)

K (2”)

K (3”)

L

M

KLT-20E

21[533]

18[457]

38[965]

36[914]

15[381]

18[457]

14[356]

19.25[489]

14.75[375]

15.5[394]

18[457]

17.5[445]

-

63.5[1613]

KLT-30E

24[610]

20[508]

38[965]

39[990]

16.5[419]

19[483]

12.38[314]

19.25[489]

16.75[425]

17.25[438]

16[406]

15.5[394]

-

66.5[1689]

KLT-40E

26[660]

22.5[572]

38[965]

41[1041]

17.5[445]

23[584]

10254]

20.25[514]

17.5[445]

18.5[470]

13.5[343]

13[330]

-

68.5[1740]

KLT-60E

29.5[749]

26[660]

42[1067]

44.5[1130]

19.13[486]

24[610]

11[280]

22.25[565]

19.5[495]

20.75[527]

14[356]

13.5[343]

10.5[267]

76[1930]

KLT-80E

33[838]

28[711]

45[1143]

48[1219]

20.88[530]

27[686]

12.6[321]

23.75[603]

20.25[514]

21.25[540]

15[381]

14.5[368]

12[305]

82.5[2096]

KLT-100E

35.5[902]

29.75[755]

48.75[1238]

49.5[1257]

22.25[565]

32[813]

14.5[368]

25.25[641]

20.25[514]

21.25[540]

18.75[476]

18.25[464]

14[356]

88.5[2248]

SHORT FORM SPECIFICATIONS

Provide Blodgett model KLT-20E (20 gallon), KLT-30E (30 gallon), KLT-40E (40 gallon), KLT-60E (60 gallon), KLT-80E (80 gallon) or KLT-100E (100 gallon) electrically heated tilting ket- tle on legs. The unit shall have a double wall interior to form a steam jacket around the lower 2/3 of the kettle. The jacket enclosure shall contain distilled water which is factory sealed. The bottom of the kettle shall be of hemispherical design for superior heat circulation. The console shall be drip proof, stainless steel clad and shall be supported on all welded, 1-5/8” (42mm) diameter stainless steel frame and legs fitted with 4 hole adjustable flanged feet for securing to floor. The unit shall pivot on trunions connected to the tilt mechanism and the out- bore bearing connected to the frame and shall permit the kettle to tilt forward a full 90° for complete emptying. The tilt mechanism shall be self locking for positive stop action. Construction shall be of all welded satin finish 304 stainless steel. The controls shall be integrally mounted and shall include a power switch, thermostat with range of 165-285°F (74-140°C), a cook indicator light, pressure gauge, safety valve, low water light and low water shut off. The elements shall be removable. Unit shall be ASME code stamped and National Board registered. Provide options and accessories as indicated.

AVAILABLE kW

MODEL	STD	OPT
KLT-20E	12	N/A
KLT-30E	15	N/A
KLT-40E	18	24
KLT-60E	18	24, 33
KLT-80E	18	24, 33
KLT-100E	24	33

AMPS PER LINE

KW	PHASE	208V	220V	240V	380V	415V	480V	600V
12	1	57.7	54.4	50.0	N/A	N/A	N/A	N/A
	3	33.3	31.5	28.9	18.2	16.7	14.4	11.6
15	1	72.1	68.2	62.5	N/A	N/A	N/A	N/A
	3	41.6	39.4	36.1	22.8	20.9	18.0	14.5
18	3	50.0	47.2	43.3	27.3	25.0	21.7	21.7
24	3	66.6	63.0	57.7	36.5	33.4	28.9	23.1
33	3	91.6	86.6	79.4	50.1	45.9	39.7	31.8

POWER CONNECTION:

Refer to data plate.

MAXIMUM PRESSURE:

All models 50 PSI (345 kPa)

SHIPPING INFORMATION:

Approx. Weight:

KLT-20E	350 lbs. (159 kg)
KLT-30E	365 lbs. (166 kg)
KLT-40E	400 lbs. (181 kg)
KLT-60E	465 lbs. (211 kg)

NOTE: The company reserves the right to make substitutions of components without prior notice.

KLT-80E	570 lbs. (259 kg)
KLT-100E	680 lbs. (308 kg)

BLODGETT

www.blodgett.com 44 Lakeside Avenue, Burlington, VT 05401 Toll Free: (800) 331-5842 • Phone: (802) 860-3700 • Fax: (802) 864-0183

Printed in U.S.A. NOTE: FOR COMMERCIAL USE ONLY P/N S00015 Rev E (12/06)