Blomberg FNT 9682 A+ Installation, Points to be considered when re-transporting your refrigerator

Models: FNT 9681 A+ FNT 9682 A+ FNT 9681 XA+ FNT 9682 XA+

1 136
Download 136 pages 32.56 Kb
Page 10
Image 10
3Installation

3Installation

BPlease remember that the

manufacturer shall not be held liable if the information given in the instruction manual is not observed.

Points to be considered when re-transporting your refrigerator

1. Your refrigerator must be

 

 

 

emptied and cleaned prior to any

 

 

 

transportation.

 

 

 

2. Shelves, accessories, crisper and

3.

Clean the interior of the refrigerator as

etc. in your refrigerator must be

 

recommended in the “Maintenance

fastened securely by adhesive tape

 

 

and cleaning” section.

against any jolt before repackaging.

 

4.

Plug the refrigerator into the wall

3. Packaging must be tied with thick

 

outlet. When the fridge door is open

tapes and strong ropes and the

 

 

the fridge compartment interior light

rules of transportation printed on the

 

 

will come on.

package must be followed.

 

5.

You will hear a noise as the

Please do not forget…

 

compressor starts up. The liquid and

Every recycled material is an

 

 

gases sealed within the refrigeration

indispensable source for the nature

 

 

system may also give rise to noise,

and for our national resources.

 

 

even if the compressor is not running

If you wish to contribute to recycling

 

 

and this is quite normal.

the packaging materials, you can

 

6.

Front edges of the refrigerator may

get further information from the

 

feel warm. This is normal. These

environmental bodies or local

 

 

areas are designed to be warm to

authorities.

 

 

avoid condensation.

Before operating your

 

Electric connection

refrigerator

Connect your product to a grounded

Before starting to use your refrigerator

socket which is being protected by a

check the following:

fuse with the appropriate capacity.

1. Is the interior of the refrigerator dry

Important:

and can the air circulate freely in the

The connection must be in

rear of it?

 

compliance with national regulations.

2. You can install the 2 plastic wedges

 

The power cable plug must be easily

as illustrated in the figure. Plastic

 

accessible after installation.

wedges will provide the required

 

The specified voltage must be equal

distance between your refrigerator

 

to your mains voltage.

and the wall in order to allow the air

 

Extension cables and multiway plugs

circulation. (The illustrated figure is

 

must not be used for connection.

only an example and does not match

 

 

 

 

exactly with your product.)

8

EN

Page 10
Image 10
Blomberg FNT 9682 A+ Installation, Points to be considered when re-transporting your refrigerator, Before operating your