Blomberg FSE1630u Installation, Points to be considered, when re-transportingyour, refrigerator

Models: FSE1630u

1 28
Download 28 pages 28.19 Kb
Page 8
Image 8
Installation

 

3

Installation

 

 

B

Please remember that the

3.Clean the interior of the refrigerator as

 

 

manufacturer shall not be held liable if

recommended in the “Maintenance

 

 

the information given in the instruction

and cleaning” section.

 

 

manual is not observed.

4.Plug the refrigerator into the wall outlet.

 

Points to be considered

When the fridge door is open, the

 

when re-transporting your

fridge compartment interior light will

 

refrigerator

come on.

 

1.Your refrigerator must be emptied and

5.You will hear a noise as the

 

 

cleaned prior to any transportation.

compressor starts up. The liquid and

 

2.Shelves, accessories, crisper and etc.

gases sealed within the refrigeration

 

 

in your refrigerator must be fastened

system may also give rise to noise,

 

 

securely by adhesive tape against any

even if the compressor is not running

 

 

jolt before repackaging.

and this is quite normal.

 

3.Packaging must be tied with thick

6.Front edges of the refrigerator may feel

 

 

tapes and strong ropes and the

warm. This is normal. These areas

 

 

rules of transportation printed on the

are designed to be warm to avoid

 

 

package must be followed.

condensation

 

Please do not forget…

Electric connection

 

Every recycled material is an

Connect your product to a grounded

 

socket which is being protected by a

 

 

indispensable source for the nature

 

 

fuse with the appropriate capacity.

 

 

and for our national resources.

 

 

Important:

 

If you wish to contribute to recycling

 

 

the packaging materials, you can

• The connection must be in compliance

 

 

get further information from the

with national regulations.

 

 

environmental bodies or local

• The power cable plug must be easily

 

 

authorities.

accessible after installation.

 

Before operating your

• The specified voltage must be equal to

 

refrigerator

your mains voltage.

 

Before starting to use your refrigerator

• Extension cables and multiway plugs

 

 

check the following:

must not be used for connection.

 

1.Is the interior of the refrigerator dry and

B

 

 

can the air circulate freely in the rear

A damaged power cable must be

 

 

replaced by a qualified electrician.

 

 

of it?

BProduct must not be operated before

 

2.Please install the 2 plastic wedges

it is repaired! There is danger of

 

 

as illustrated in the figure. Plastic

 

 

electric shock!

 

 

wedges will provide the required

 

 

Disposing of the packaging

 

 

distance between your refrigerator

The packing materials may be

 

 

and the wall in order to allow the air

 

 

dangerous for children. Keep the

 

 

circulation. (The illustrated figure is

 

 

packing materials out of the reach

 

 

only an example and does not match

 

 

of children or dispose of them by

 

 

exactly with your product.)

classifying them in accordance

 

 

 

7

EN

Page 8
Image 8
Blomberg FSE1630u manual Installation, Points to be considered, when re-transportingyour, refrigerator, Electric connection