REVERSING THE DOORS

We recommend that you reverse doors before switching on for the first time.

Tools required: Small and medium size flat and cross-headed screwdrivers, a pair of pliers.

Spare Parts supplied in the plastic bag: The following parts, which are exclusively for left hand side fitted hinge operation are supplied in a plastic bag with the appliance:

-Upper door top trim hinge covers – there are 2 different parts, one for each side of top trim.

-Upper door middle hinge bushing/ door stopper assembly.

We suggest you keep all the parts supplied in the plastic bag and also parts, which have been removed when reversing doors, in a safe place for possible future, re-use.

IMPORTANT: We suggest you ask somebody to help you when moving the appliance around and to hold doors when removing / re-fitting hinges and doors to avoid any injury and damage to the product.

Please refer to diagrams supplied. To follow numbers in brackets below, refer to the main diagram.

1.Switch off the appliance at the socket outlet and pull out the mains plug.

2 .Remove all food, loose items and fittings from the appliance and door shelves.

3.Unscrew the bolts and remove the middle hinge while holding doors. (1)

4.Remove the freezer door from the top hinge. (2)

5.Remove the fridge door. (3)

6.Remove the plastic covers on the front top trim. (4)

7.Unscrew the bolts of the top hinge and remove top hinge. (5)

8.Reposition plugs on the opposite side. (6)

9.Remove the kick plate. (7)

10.Carefully tilt the appliance on its back. (8)

(You may need somebody to help you.)

11.Unscrew and remove the left hand side front feet. (9)

12.Unscrew and remove the bottom hinge. (10-11)

13.Unscrew and remove the middle hinge bushing and metal bracket from fridge door. (12)

14.Use the metal hinge bushing that is unscrewed. (13)

15.Screw and fix the new middle hinge metal bracket which is supplied in Instruction Booklet bag to the other side.(14)

16.Reposition the hinge bushing and the tap on the fridge door. (15)

17.Unscrew and reposition the bottom hinge bushing. (16)

18.Unscrew bolt of the pin on the bottom hinge. Fit the pin to the other hole on the hinge and tighten the bolt on the new position. (17)

13

EN

Page 13
Image 13
Blomberg KGM 9680 PX manual Reversing the Doors