Blomberg KGM 9690 Icematic and ice storage container, Sliding Body Shelves, Using the Icematic

Models: KGM 9690

1 25
Download 25 pages 63.86 Kb
Page 19
Image 19
Icematic and ice storage container

Icematic and ice storage container

Using the Icematic

*Fill the Icematic with water and place it into its seat. Your ice will be ready approximately in two hours. Do not remove the Icematic from its seating to take ice.

*Turn the knobs on it clockwise by 90 degrees.

Ice cubes in the cells will fall down into the ice storage container below.

* You may take out the ice storage container and serve the ice cubes.

*If you wish, you may keep the ice cubes in the ice storage container.

Ice storage container

Ice storage container is only intended for accumulating the ice cubes. Do not put water in it. Otherwise, it will break.

Sliding Body Shelves

Sliding body shelves can be pulled by slightly lifting up from the front and moved back and forth. They come to a stop point when pulled towards front to allow you reach the foods placed at the back of the shelf; when it is pulled after slightly lifting upwards at the second stop point, the body shelf will be released.

The shelf should be held tightly from the bottom as well in order to prevent it from tipping over. The body shelf is placed on the rails at the sides of the refrigerator body by bringing it to one lower or one upper level.

The body shelf should be pushed backwards to seat it completely.

18

EN

Page 19
Image 19
Blomberg KGM 9690 Icematic and ice storage container, Sliding Body Shelves, Using the Icematic, Ice storage container