BThe ventilation hose should not be connected to the chimney of a stove or a fireplace.

BDo not operate your product at the same time with heaters such as a coal or gas stove. Airflow may cause the chimney to flare up.

Connection to water drain (Products with a condenser);

In products equipped with condenser unit, water accumulated during the drying cycle accumulates in the water tank. You should drain accumulated water after each drying cycle.

You can directly drain accumulated water through the water drain hose supplied with the product instead of periodically draining the water collected in the water tank.

Connecting the water drain hose:

1. Pull the hose out by its end to remove it from the product. Do not use any tools to remove the hose. Attach the drain hose adaptor to the end of this hose.

2. Connect the special drain hose supplied with the product to the hose adaptor fitting.

3. Connect the other end of the drain hose directly to the wastewater drain or to the washbasin. The fitting must always be secured in every type of connection. Your house may flood if the hose comes out of its housing during water discharge.

CWhen you direct the water drain to outside, “Water Tank” warning light will turn on at the end of each programme.

Important:

•The hose should be attached to a height of maximum 80 cm.

•Make sure that the hose is not pinched or bend.

•The end of the hose should not be bent, it should not be stepped on and it must not be folded between the drain and the product.

Connecting the water drain hose for models with the water tank at the bottom; Connection pipe to water drain is at the bottom rear of your machine.

1. Remove the bracket and the rubber cap.

2.Attach the drain hose and replace the bracket to its position.

Important:

C There is no pump in the machine, so ensure that the hose is placed to allow a easy water flow.

C The end of the hose should never be higher than the level of the water outlet on the machine. Otherwise, the “tank full” light of your machine will illuminate and stop the programme.

C If the dryer is mounted on the washing machine by means of a bracket, use of the water drain hose is recommended. The drain hose should be directed downwards as shown in the figure.

Adjusting feet

In order to ensure that your product operates more silently and vibration-free, it must stand level and balanced on its feet. Front feet of your product can be adjusted. Balance the machine by adjusting the feet.

1. Loosen the feet by hand.

2. Adjust the feet until the product stands level and firmly on the floor.

CDo not use any tools to loosen the adjustable feet, otherwise, they can be damaged.

CNever remove the adjustable feet from their housings.

2 plastic pieces supplied along with the user manual prevent your machine from slipping on wet and slippery surfaces. To install the plastic

6 - EN

Page 5 Page 7
Page 6
Image 6
Blomberg TAF 7239 manual Adjusting feet, Connection to water drain Products with a condenser
Page 5 Page 7

TAF 7239 specifications

The Blomberg TAF 7239 is a state-of-the-art appliance that seamlessly blends innovative technology with practical design, making it a standout choice for modern households. This sleek and efficient refrigerator-freezer combination is engineered to meet the needs of today’s consumers who value both functionality and aesthetics in their kitchen appliances.

One of the key features of the Blomberg TAF 7239 is its impressive energy efficiency, earning an A++ energy rating. This not only translates to lower electricity bills but also reflects a commitment to environmentally friendly practices. The appliance operates quietly, allowing for a peaceful kitchen environment, which is a significant advantage, especially in open-plan living spaces.

The refrigerator section offers ample storage with a total capacity of 251 liters, providing generous space for fresh produce, beverages, and leftovers. The adjustable shelves allow for customized organization, enabling users to optimize space based on their specific needs. Additionally, the bright LED lighting ensures that every corner is illuminated, making it easy to locate items quickly.

One notable technology found in the Blomberg TAF 7239 is the Active Ion technology. This innovative feature helps to prolong the freshness of food by reducing bacteria and odors within the refrigerator, creating a healthier environment for food storage. The specially designed Fresh Zone compartment is ideal for maintaining optimal humidity levels, which is crucial for extending the life of fruits and vegetables.

In terms of freezing capabilities, the Blomberg TAF 7239 excels with a 98-liter freezer compartment. This space is designed with clear drawers that facilitate easy access to frozen items. The fast freeze function is particularly noteworthy, allowing users to freeze fresh items quickly, preserving their nutrients and flavor.

The appliance also incorporates a digital temperature control system that provides precise temperature management for both the fridge and freezer sections. This feature is complemented by intelligent alerts, notifying users when the door is left ajar or if the internal temperature rises unexpectedly.

Overall, the Blomberg TAF 7239 is a perfect blend of style, efficiency, and advanced technology. Its thoughtful design and cutting-edge features make it an ideal addition to any contemporary kitchen, ensuring that food remains fresh while enhancing the overall cooking and dining experience. With its focus on user-friendly operation and sustainability, this refrigerator-freezer combination is a smart investment for those who appreciate quality and convenience.
Top Page Image Contents