5Maintenance and cleaning
Filter Cartridge / Door Inner
Surface
Lint and fibres released from the laundry to the air during the drying cycle are collected in the “Filter Cartridge”.
CSuch fibre and lint are generally formed during wearing and washing.
CAlways clean the filter and the inner surfaces of the cover after each drying process.
CYou can clean the filter and filter area by vacuum cleaner.
To clean the filter:
1.Open the loading door.
2.Remove the cover filter by pulling it up and open the filter.
3.Clean lint, fibre, and cotton raveling by hand or with a soft piece of cloth.
4.Close the filter and place it back into its
seat.
C Clogging may arise on the filter surface after using your machine for some time; if this occurs, wash the filter with water and dry it before using again.
CClean the entire inner surface of the cover and door gasket.
Sensor |
There are humidity sensors in your dryer that detect whether the laundry is dry or not.
To clean the sensor:
1.Open the loading door of the dryer.
2.Allow the machine to cool down if drying has been carried out.
3.Wipe the metal sensors with a soft cloth, dampened with vinegar and dry them.
CClean metal sensors 4 times a year. A Never use solvents, cleaning agents or similar substances when cleaning
