Changing the Interior
Lighting Bulb
If the lamp does not operate, follow the following procedures:
1.Switch off the electric connection of the refrigerator and pull out the plug.
Remove all shelves and drawers for easy access.
2.Remove the cover carefully by pressing it on the edge with your index finger, as seen in figure b. Try not to damage the plastic cover and interior facing.
3.First, screw the bulb into its
socket tightly and check whether it is loosened. Insert the plug again and switch on the electricity. If the bulb operates, replace the light cover by placing the back lock, pushing it onto its place.
4.If the bulb does not operate, switch off the electric connection of the refrigerator and pull out the plug. Replace the bulb with a new 15 watt (maximum), screw covered E14 (SES) bulb.
5.Immediately chuck out the damaged bulb carefully and properly.
Spare bulb can be obtained from authorized services.
10
EN
