Contact 1-800-762-1142 for assistance.

®

Do not return to place of purchase.

 

 

 

 

 

Step 10 – Attach Dome to Emitter

Gently lay heater on its side

Tip: Use styrofoam end to prop up top half of heater.

Align holes in Dome with Emitter Studs.

Secure Dome to Emitter using (3) Cap Nuts.

Leave heater on its side for next step.

Step 11 – Secure Gas Line

Line up hole in Gas Clip with threaded hole in Support Plate.

Attach using (1) Extra Long Screw.

Tighten screw in Gas Line Clip until Gas Line is held securely in place.

Stand heater upright on base.

Step 12 – Connect Gas Line to Cylinder

The pressure regulator and hose assembly supplied with the appliance must be used and replacements must be those specified by the manufacturer.

Slide full Propane Cylinder onto Heater Base.

Attach Gas Line to Cylinder by turning black plastic knob clockwise over Cylinder valve until tight.

Note: Be careful not to kink flexible hose of Gas Line.

Caution:

Before you attempt to use a propane cylinder, understand all cylinder and propane related precautions in Section #1 - “Safety First.”

Owner’s manual: model 163000 outdoor patio heater

12/15/03

10