Contact | ® |
Do not return to place of purchase. |
|
|
|
|
|
Step 8 – Securing the Tank
Mount your 20 lb. cylinder to a sturdy object such as a table or post within 3 to 4 feet of your heater when in use, this will prevent movement or tipping of the cylinder during operation.
The clamp on the cylinder ring will attach to any round pole from 1” to 2” in diameter, or a square post from 1” to 2” square. It will also adapt to various other shapes up to 2” wide.
Determine where to locate your 20 lb. cylinder. Be sure that it is within 2” what you are mounting it to.
Place the bracket halves around the object and insert the 2” bolts through the open holes in one bracket and into the matching threaded holes in the second bracket. Position bracket within 6” of the middle of the cylinder. Finger tighten bolts.
Slide the 20 lb. cylinder into the curved portion of the bracket, making sure strapping ends are not between cylinder and bracket. Enclose cylinder in strap and securely tighten strap in buckle.
Using a 7/16” wrench, tighten the 2” bolts until they are secure. DO NOT OVER TIGHTEN.
In some cases you may wish to secure your cylinder to a larger object or a wall. It is possible to mount the bracket attached to the straps to these surfaces by drilling matching holes and using screws and nuts or lag screws (not provided) to secure your cylinder.
Note: Once you have read “safety first” and successfully completed
Steps 1 – 8, you are ready to begin operating your heater.
Owner’s manual: model 62900 portable outdoor heater | 9/3/03 | 10 |