Outdoor LP Gas Barbecue Grill Model No. GBT702W
Operating Instructions (continued)
10.After lighting, observe the burner flame. Make sure all burner ports are lit and flame height matches illustration. (Figure 7)
Caution: If burner flame goes out during operation, immediately turnthe gas “OFF” and open lid to let the gas clear for about 5 minutes before
3.Wear protective gloves and use long handle tongs to place food onto cooking grids above the lit burners.
4.Adjust controls to desired temperature.5.With lid open or closed, cook until desired internal food temperatures are achieved.
6.Turn grill “OFF” by turning control knob to the “LOCK OFF” position. Remove LP gas tank and properly store tank.
Tips for Better Cookouts and Longer Grill Life1.For food safety tips visit: http://www.fsis.usda.gov/Fact_Sheets/Barbecue_Food_Safety/
2.Use the upper cooking grid (warming rack) for keeping cooked food warm, toasting breads or cooking delicate foods in aluminum foil pouches.
3.To keep food from sticking to the grids, spray or coat with cooking oil before lighting.
4.To reduce
5.Place delicate foods like fish and vegetables in aluminum foil pouches and place on upper cooking levels (warming rack).
6.To avoid losing natural juices, use long handled tongs or spatulas instead of forks and turn foods over just once during cooking.
7.Enhance food flavors by using wood chips in smoker boxes or aluminum foil pouches. Follow the wood manufacturer’s instructions.
8.Clean cooking grids and racks after every use with a quality grill bush designed for your grid material. Wear protective gloves and gently remove the
9.After every use, allow grill to cool. Then protect clean cooking grids with a light coat of cooking oil, empty grease pan (if included), wipe outside surfaces with a suitable kitchen cleaner and store in a cool dry place.
10.Visit websites like www.bluerhino.com, watch barbecue themed TV shows or purchase related barbecue cookbooks to learn more interesting tips.
Cleaning and Care
Caution: All cleaning and maintenance should be done when grill is cool and with the fuel supply disconnected.
Caution: DO NOT clean any grill part in a self cleaning oven. The extreme heat will damage the finish.
3.Do not clean any grill part in a self cleaning oven. The extreme heat will damage the finish.
Cleaning Surfaces1.Wipe surfaces clean with mild dishwashing detergent or baking soda.2.For stubborn surfaces use a citrus based degreaser and a nylon scrubbing brush.
3.Rinse clean with water.Cleaning Burner1.Turn gas off at the control knob and remove LP gas tank.2.Remove regulator and wind guard.3.Remove cooking grids and heat plate.4.Disconnect wire from igniter.5.Remove burner.6.Clean inlet of burner with small bottle brush or compressed air.7.Remove all food residue and dirt on burner surface.8.Clean any clogged ports with a stiff wire (such as an opened paper clip)9.Inspect burner for any damage (cracks or holes). If damage is found, replace with new burner.
10.Reinstall burner. Reconnect igniter, wind guard, and regulator.11.Replace heat plate and cooking grid12.Preform leak test.Product Registration
For faster warranty service, please register your product immediately at www.bluerhino.com or call 1.800.762.1142.
Limited Warranty
Blue Rhino Global Sourcing, Inc (“Vendor”) warrants to the original retail purchaser of this product, and to no other person, that if this product is assembled and operated in accordance with the printed instructions accompanying it, then for a period of one (1) year from the date of purchase, all parts in such product shall be free from defects in material and workmanship. Vendor may require reasonable proof of your date of purchase. Therefore, you should retain your sales slip or invoice. This Limited Warranty shall be limited to the repair or replacement of parts, which prove defective under normal use and service and which Vendor shall determine in its reasonable discretion upon examination to be defective. Before returning any parts, you should contact Vendor’s Customer Service Department using the contact information listed below. If Vendor confirms, after examination, a defect covered by this Limited Warranty in any returned part, and if Vendor approves the claim, Vendor will replace such defective part without charge. If you return defective parts, transportation charges must be prepaid by you. Vendor will return replacement parts to the original retail purchaser, freight or postage prepaid.
This Limited Warranty does not cover any failures or operating difficulties due to accident, abuse, misuse, alteration, misapplication, improper installation or improper maintenance or service by you or any third party, or failure to perform normal and routine maintenance on the product as set out in this owner’s manual. In addition, the Limited Warranty does not cover damage to the finish, such as scratches, dents, discoloration, rust or other weather damage, after purchase.
This Limited Warranty is in lieu of all other express warranties. Vendor disclaims all warranties for products that are purchased from sellers other than authorized retailers or distributors, including the warranty of merchantability or the warranty of fitness for a particular purpose.
VENDOR ALSO DISCLAIMS AND ANY ALL IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. VENDOR SHALL NO LIABILITY TO PURCHASER OR ANY THIRD PARTY FOR ANY SPECIAL, INDIRECT, PUNITIVE, INCIDENTAL, OR CONSEQUENTIAL DAMAGES. Vendor further disclaims any implied or express warranty of, and assumes no responsibility for, defects in workmanship caused by third parties.
This Limited Warranty gives the purchaser specific legal rights; a purchaser may have other rights depending upon where he or she lives. Some jurisdictions do not allow the exclusion or limitation of special, incidental or consequential damages, or limitations on how long a warranty lasts, so the above exclusion and limitations may not apply to everyone.
Vendor does not authorize any person or company to assume for it any other obligation or liability in connection with the sale, installation, use, removal, return, or replacement of its equipment, and no such representations are binding on Vendor.
Blue Rhino Global Sourcing, Inc