Contact 1.800.762.1142 for assistance. Do not return to place of purchase.

page no.

3

 

 

Step

2

Step

3

Step

4

Attach handle and air damper

A. Attach handle to bottom bowl using 2 sets of heat resistant washers (I), small washers (G), large lock washers (K), large wing nuts (F).

B. Attach air damper to bottom bowl using 2 sets of small screws (A) and small wing nuts (E).

Attach legs and wheels

A. Attach front legs and wheel legs to bottom bowl using 4 sets of leg cups, large washers (H), and large screws (C).

Note: Do not tighten large screws (C) until bottom support grid is attached.

B. Attach bottom support grid to front legs using 2 sets of small washers (G) and large wing nuts (F).

C. Attach wheels and bottom support grid to wheel legs using 2 sets of wheel nuts (D).

D. Tighten all 4 large screws (C).

Attach top lid to bottom bowl

A. Attach lid to bottom bowl using 4 sets of small screws (A) and small wing nuts (E).

B. Insert support clips.

Step

5

Step

6

Step

7

Insert warming rack

A. Slide warming rack into holes in lid and bottom bowl.

Note: Look for corresponding holes on side of lid. Insert short wire ends into lid holes, one side at a time. Position warming rack legs into slots on grill body sides.

B. Cut zip tie on warming rack.

Insert charcoal grid and cooking grid

Place charcoal grid and cooking grid into bottom bowl.

Completed

Congratulations your assembly is now complete. Read Operating Instructions before proceeding.