Outdoor Charcoal Barbecue Grill Model No. NB2153D

Assembly InstructionsDO NOT RETURN PRODUCT TO STORE.

For assistance call 1.800.762.1142 toll free.. Please have your owner’s manual and serial number available for reference..

For Easiest Assembly:

•To avoid losing any small components or hardware, assemble your product on a hard level surface that does not have cracks or openings..

•Clear an area large enough to layout all components and hardware..

•When applicable, tighten all hardware connections by hand first.. Once the step is completed, go back and fully tighten all hardware..

•Follow all steps in order to properly assemble your product..

Step Attach handle and air vent

1

A.. Attach handle to lid using 2 sets of heat resistant washers (K), medium washers

(I), large lock washers (M), large wing nut (G)..

B.. Attach air vent to lid using medium screw (B), small lock washer (L) and small

wing nut (F)..

Step

3

Attach legs and wheels

A..Attach front legs and wheel legs to bottom bowl using 4 sets of leg cups, large washers (J), and large screws (C)..

Note: Do not tighten large screws (C) until bottom support grid is attached..

B..Attach bottom support grid to front legs using 2 sets of medium washers (I) and large wing nuts (G)..

C..Attach wheels and bottom support grid to wheel legs using 2 large nuts (E)..

D..Tighten all 4 large screws (C)..

Step

2

Step

4

Attach handle and air damper

A..Attach handle to bottom bowl using 2 sets of heat resistant washers (K), medium washers (I), large lock washers (M), large wing nuts (G)..

B..Attach 2 air dampers to bottom bowl using 4 sets of small screws (A) and small wing nuts (F)..

Step

5

Attach basket

Clip front basket to front legs..

Attach side table

Attach side table to bottom bowl using 2 sets of small nuts (D), small lock washers (L), small washers (H) and medium screws (B)..