Outdoor LP Gas Mosquito Exterminator Model No. SV3100

Assembly Instructions (continued)

9

Operate WaveDrawer® Cover

CAUTION: Do not operate SkeeterVac® with WaveDrawer® cover on the

WaveDrawer®. Cover is only used when emptying or inspecting trap.

Place WaveDrawer® Cover

Installing LP Gas Tank

To operate you will need (1) precision-filled standard grill LP gas tank (20#) with external valve threads.

Note: An empty standard grill LP gas tank weighs approximately 18 lbs. A precision-filled standard grill LP gas tank should weigh no more than 38 lbs.

Insert LP Gas Tank

Place precision filled LP gas tank upright into hole in SkeeterVac® body so it is arranged for vapor withdrawal.

Place LP Gas Tank Cover

Place the LP gas tank cover onto the LP gas tank.

Connect LP Gas Tank

Before connecting, be sure that there is no debris caught in the head of the LP gas tank, head of the regulator valve or in the head of the burner and burner ports.

Connect gas line to tank by turning knob clockwise until it stops.

Disconnect LP Gas Tank

Before disconnecting make sure the LP gas tank valve OFF.Disconnect gas line to tank by turning knob counterclockwise until it is loose.

Need a tank of gas? Try Blue Rhino® tank exchange service. It’s easy, fast, safe, and available at tens of thousands of conveniently located retail outlets nationwide. You can purchase a new full tank or exchange your empty for a precision filled one.

Visit www.bluerhino.com for a location closest to you.