page no.

Contact 1.800.762.1142 for assistance. Do not return to place of purchase.

 

 

 

 

Operating Instructions

 

 

 

 

 

WARNING: Before using this outdoor fireplace, make sure you have

 

 

 

 

 

read, understand and are following all information provided in the

 

 

 

 

 

Important Safeguards presented on page 2. Failure to follow those

5

 

 

 

 

instructions can cause death, serious injury or property damage.

Attach Spark Guard

 

Lighting

 

 

 

 

 

 

1.

Make sure there is only a small amount of ash in the bottom of the bowl.

 

 

 

2.

Place a layer of dry kindling or a natural firestarter such as Fatwood™ onto the center of

 

 

 

 

 

the grate.

 

 

 

 

3.

Place above that a layer of dry seasoned hardwood that is cut to lengths no more than

 

 

 

 

 

3/4 the diameter of the bowl.

 

 

 

 

4.

Use a match to light kindling or firestarter.

 

 

 

 

5.

Using a hook and heat resistant gloves, replace spark guard once the kindling or firestarter

 

 

 

 

 

is lit.

 

 

 

 

Tending the Fire

 

 

 

 

You may need to shift and/or add logs for an ideal experience.

 

 

 

 

Do NOT place a hot spark guard or hot fireplace tools onto combustible

 

 

 

 

surfaces such as grass, wooden deck or furniture.

 

 

 

 

1.

Using a hook and heat resistant gloves, carefully remove spark guard.

 

 

 

 

2.

While using a long handled fireplace tool, shift coals and logs to allow additional airflow.

 

 

 

 

3.

Do NOT add gasoline, kerosene, diesel fuel, lighter fluid or alcohol to relight or enhance an

 

 

 

 

 

existing fire.

 

 

 

 

4. Wait until glowing coals have developed before adding any additional wood. If additional

 

 

 

 

 

wood is required, place wood on top coals. Be careful not to shift ashes.

 

 

 

 

4.

Using a hook and heat resistant gloves, replace spark guard.

 

 

 

 

Extinguishing

 

 

 

 

1.

Allow fire to burn itself out.

 

 

 

 

2.

Do NOT use water to extinguish as this is dangerous and can cause damage to this outdoor

 

A

 

D

 

fireplace.

 

x 2

x 2

 

 

 

 

 

 

 

 

 

 

Cleaning and Care

6

Insert Wood Grid and Spark Guard

Inspecting

This outdoor fireplace should be inspected on a regular basis to ensure product safety and

 

 

 

 

 

 

longer product life.

 

 

 

Do NOT attempt to inspect this outdoor fireplace until the fire is COMPLETELY out.

 

 

 

 

1.

Check handles to make sure they are secure.

 

 

 

 

2.

Check components for any signs of damage or rust.

 

 

 

 

3.

If damage to any component is detected, do NOT operate until repairs are executed.

Cleaning

This outdoor fireplace should be cleaned on a regular basis to promote safer experiences and longer product life.

Note: After repeated use, a slight discoloration of the finish may occur.

Do NOT attempt to clean this outdoor fireplace until the fire is COMPLETELY out. Do NOT use oven cleaner or abrasive cleaners as they will damage this product.

Do NOT clean any part of this outdoor fireplace in a self cleaning oven as it may damage the finish.

1. Wipe exterior surfaces with a mild dishwashing detergent or baking soda.

2. For stubborn surfaces use a citrus based degreaser and a nylon scrubbing brush.

3. Rinse clean with water.

4. Remove built-up creosote from components with a chimney cleaning product.

Storage

Do NOT move or store this outdoor fireplace until the fire is COMPLETELY out.

1. Once the fire is out, coals are cold and outdoor fireplace is cool to the touch, remove ashes and properly dispose.

2. Cover outdoor fireplace with a durable vinyl cover designed to fit this unit.

3. Store assembled in a location away from children and pets.

Note: If you do not use a cover, store this outdoor fireplace in a dry location to maximize product life.