BlueAnt Wireless X5 Using the Audio Streamer with Headset, Switching the Audio Streamer ON/OFF

X5 Stereo Bluetooth Headset 15

Using the Audio Streamer with Headset

zTo use the Audio Streamer with Headset to listen to music, the two devices must first be paired and connected.

zTo pair Audio Streamer with Headset, first put Headset into pairing mode. To put Audio Streamer in pairing mode, mount battery onto Audio Streamer. Click and hold ON/OFF button continuously for about 5 seconds. LED will first flash Blue rapidly and then change to alternating red and blue flash. When LED flashes red and blue, release button.

zAfter a few seconds, Headset and Audio Streamer will be paired and connected. When paired and connected, LED of Headset will turn OFF and LED of Audio Streamer will turn ON blue with periodic flash.

Switching the Audio Streamer ON/OFF

zTo switch on Audio Streamer, click and hold ON/OFF button for 3-4 seconds until LED flashes blue rapidly and then release button.

zTo switch off Audio Streamer, click and hold ON/OFF button for 3-4 seconds until LED flashes red rapidly and then release button.

Note: Interoperability of Audio Streamer is guaranteed only when used with X5 Stereo Bluetooth Headset.

Using Audio Streamer with Headset to Listen to Music

zWith Headset and Audio Streamer connected, plug one end of the Stereo Cable into the Audio Streamer and the other end into the stereo jack of audio device i.e. iPod,Mp3 player etc

zFrom now on, music will play from the Headset in stereo mode.

zWhile playing music, you can control volume and mute by manipulating buttons on Headset. However, it is important to note that during execution of mute, even though music will not be heard from Headset, music will continuously be playing from the audio device itself. This is due to the fact audio signal processing from Audio Streamer is analog in nature.