Making a call
*Mobile phone with voice recognition
. Make sure the voice recognition function on your mobile is activated and your voice tags have been recorded with the phone. To enter these, please refer to your phone’s manual
. When there is no incoming or active call, press once on the TALK button
. Wait for the audio signal sent by the mobile phone (generally a short tone).
. Speak the name of person you wish to call.
Mobile without voice recognition
. Make sure both the headset and the mobile phone are ON and in
. Dial the number on the phone keypad, after approximately 2 seconds the audio connection will be established.
*This function may not be available on some phones, please refer to the trouble shooting frequent asked questions in our website: www.bluetrek.com. to find out more.
Answering a call
When the headset rings, press once on the TALK button to take the call.
Ending a call
Press once on the TALK button to end an active call.
Adjusting the volume
To increase the volume during an active call, press the “VOL+” button on the headset.
To decrease the volume during an active call, press the
Muting the microphone
To mute the microphone during an active call
During an active call, press and hold the VOL+ button for approximately 2 seconds. A periodic tone can be heard in the speaker when the microphone is muted.
To end the mute function
When the microphone is muted, quickly press the VOL+ button on the BLUETREK® Skin. The periodic tone will end.
Transferring a call from BLUETREK® Skin to the mobile phone
During an active call, press the TALK button for about 2 seconds. (This function only works in the
In the Headset profile, you can simply turn off your headset.
Transferring a call from the mobile phone to the BLUETREK® Skin
During an active call on the mobile phone, press once on the TALK button to transfer the call.
PAGE 6 / 9
