BMW Wireless Headphone manual Resetting the Earpiece, General Operation, To pair in Headset mode

BlueSport_1Manual 6 language.qx 12/12/03 11.28 AM Page 5

SECTION 3: Pairing Earpiece to Your Phone

Before you use the earpiece for the first time, you must pair the earpiece with your mobile phone. For Hands Free mode pairing instructions, see below.

To pair in Headset mode:

1.Activate the Bluetooth® function on your phone or other device. Please refer to the owner‘s manual of your phone for instructions on activating the Bluetooth® pairing function.

2.To pair the earpiece, press the pairing button once until the LED indicator light on the earpiece flashes an alternating green and amber. Make sure the earpiece and phone are close to each other.

3.Follow the Bluetooth® pairing/set-up instructions and screen prompts on your phone to pair it with the earpiece. Please refer to your phone‘s owners manual or go to www.fellowes.com/bluetooth for specific pairing instructions.

4.When prompted, enter the earpiece password: 0000. If desired, password may be changed. Please refer to the owner‘s manual of your phone for instructions.

5.If pairing is successful, the LED indicator light will show solid green for 4 seconds and then switch off.

To pair in Hands Free mode: Follow steps 1 and 2, and then press the pairing button again. The LED indicator light will flash alternately amber and green at a faster cycle. Then continue with steps 3 to 5.

PLEASE NOTE: Most Bluetooth® phones will pair with the earpiece in Headset mode, but some will also pair in Hands Free mode which provides additional functionality (see your phone‘s owners manual for more information). Pairing in Hands Free mode automatically pairs the headset in Headset mode as well.

If pairing does not work, wait 90 seconds, reset your phone or device to the beginning of the Bluetooth® pairing process, and repeat steps 1-5. Once pairing is complete, your earpiece will work with your cell phone any time both units are powered on and in close proximity to each other.

Resetting the Earpiece

When pairing the earpiece to a new Bluetooth® device, the earpiece resets itself to its default settings. This clears all current pairings and returns all functions (e.g. volume) to the original setting.

SECTION 4: General Operation

To turn the earpiece on:
Flip the on/off switch to the
on (l) position. The LED
indicator light will flash
green twice and then stay
off. You will hear short low,
medium and high tones in
quick succession.
To turn the earpiece off:
Flip the on/off switch to the
off (0) position. The unit will
immediately turn off without	Figure 6
any additional signal.

5