| of this value are recommended. | ||||||
Preamble | A preamble is a signal used in | ||||||
| wireless | environment |
| to | |||
| synchronize | the | transmitting | ||||
| timing including Synchronization | ||||||
| and Start frame delimiter. (Note: | ||||||
| If you want to change the | ||||||
| Preamble type into Long or | ||||||
| Short, please check the setting of | ||||||
| AP.) |
|
|
|
|
|
|
Authentication | The authentication type | defines | |||||
| configuration | options | for | the | |||
| sharing of wireless networks to | ||||||
| verify | identity | and |
| access | ||
| privileges of | roaming | wireless | ||||
| network cards. |
|
|
|
| ||
| You may choose between Open | ||||||
| System, Shared Key, and Auto | ||||||
| Switch. |
|
|
|
|
| |
| Open System: If the Access | ||||||
| Point is using "Open System" | ||||||
| authentication, then the wireless | ||||||
| adapter will need to be set to the | ||||||
| same authentication type. |
|
| ||||
| Shared Key: Shared Key is | ||||||
| when both the sender and the | ||||||
| recipient share a secret key. |
| |||||
| Auto | Switch: | Select |
| Auto | ||
| Switch for the adapter to select | ||||||
| the | Authentication |
| type | |||
| automatically | depending |
| on | the | ||
| Access | Point | Authentication | ||||
| type. |
|
|
|
|
|
|
Retry limits | You can set the number of retries | ||||||
| if no acknowledgement |
| appears | ||||
| from the receiving station. |
| |||||
Antennas | To set the type of the antenna | ||||||
| TxAntenna:Antenna2 (Use | the |
| ||||
| factory default) |
|
|
| the |
| |
| RX Antenna:Both (Use |
|
| ||||
| factory default) |
|
|
|
|
| |
802.11g version | This section is enabled only with | ||||||
|
|
|
|
|
|
| |
| - 14 - |
|
|
|
|
|
|