BodyCraft VF803J manual Assemble Seat And Seat Post

STEP 4 ASSEMBLE SEAT AND SEAT POST

1.Insert the Seat Post (15) intothe Rear Tube of Bike (1), adjust the height according to your perSonal height above the SAFETY LINE, tighten by Lock Lever (18).

Note: Pull lever of Lock Lever (18) backward and then release to adjust the angle of Lever.

2.Remove the pre-installed V-Lock fixed Screw (20) on rear of Stainless Steel Seat Post (15) and slide the Seat Sliding Housing (16) onto the Stainless Steel Seat Post (15), tighten by Lock Lever (18). Re-insert the V-Lock fixed screw and tighten.

SEAT

17

IS . 22

~

. , 18