Panel Descriptions

1. Aux Input - Mono summing, stereo, unbalanced RCA inputs on side panel.

2.AUX Level Control - Controls the AUX input level feed directly to the output.

3.Unbalanced Input - High-impedance unbalanced RCA input on side panel.

4.Balanced Input - High-impedance electronically balanced input (pluggable screw terminal).

5.Sensor MIC Input - Input connections for ANS500M sensor microphone(s) (pluggable screw terminal).

6.Defeat Input - The effects of the ANS501 will be defeated when these terminals are shorted together (plug- gable screw terminal).

7.Balanced Output - Low-impedance electronically balanced output (pluggable screw terminal).

8.Unbalanced Output - Low-impedance unbalanced RCA output on side panel.

9.Maximum Boost - Sets the maximum signal gain for the ANS501.

10. Ramp Speed - Sets the speed by which signal gain is increased/decreased once the ambient noise level is above/below the threshold.

11. Power Connection - Barrel type power input connector on side panel.

12. Power LED - Green LED illuminates when power is present.

13. Status LED - Bi-color LED illuminates when different thresholds are triggered to assist in setup.

14. Ambient Threshold Control - Sets the ambient noise threshold level.

15. Activity Threshold - Sets reference level of typical audio program material applied to the unit.

16. Mode Switch - Facilitates setup of the module settings.

17. Relative Gain Control - Sets the difference between the ambient noise level and page level that the ANS501 will attempt to maintain.

5

Page 5
Image 5
Bogen ANS501 specifications Panel Descriptions